INSTALLING THE PUR® MINERALCLEAR® WATER FILTER

1.Remove the fill cap and cover of the unit if already in place, then unscrew the PUR® filter cap counterclockwise 360° and remove.

2.Remove the filter from the foil pouch.

3.Take the PUR® Mineralclear® filter and drop into the filter chamber so the flat portion of the filter with the tab is on top and showing. Replace PUR® filter cap by screwing the cap clockwise 360° to tighten, so the point of the water drop shaped cap is pointing to the mark.

4.With filter properly installed, the filter life lights will be all white indicating that the filter has 100% life. White lights will sequentially disappear as the filter is used. When filter life is completely used, the red lights will illuminate.

5.Replace top cover and fill cap. Ensure the top cover is properly in place on the appliance with the pour spout pointing in the forward right corner and fill zone (with blue ring) is visible.

6.Now unit is ready to be filled with water to prime the water filtration system. Only use water in the Oster® water filtration system. Do not pour any other liquid into the system except for potable water.

NOTE: The appliance will not operate without a filter installed in the system. If no filter is in place the filter life lights will flash.

6 • osterwater.com

PRIMING THE OSTER® WATER FILTRATION SYSTEM WITH A NEW FILTER

1.You will need to flush water thru the system when a new filter is installed or when using for the first time. This will prime the filter and also rinse your system thoroughly. It is normal to see particles in the water while priming.

NOTE: It is normal when priming the system prior to first use or when changing the filter to see residue, and/ or cloudy water dispense. Once you have flushed the system with one full tank of water and disposed of the water, refill with fresh water and the water will dispense clean and clear.

2.If needed, plug in the Water Filtration system and turn on power – switch located in the back of the unit; slide to ON.

3.With the new PUR® Mineralclear® filter in place (see previous sections to install the filter). Remove the fill cap and pour water thru the fill zone (with blue ring) to MAX fill line. Water will drain down through the system, so keep filling until it reaches the MAX fill line and replace cap. (Also see page 9, Filling the Appliance.) The blue water window also indicates the unit is full, with the white ball on top. Bubbling sounds are normal as air escapes as water is poured in.

NOTE: Never use hot water as it will damage the filter and reduce filter life. Always fill with cool water.

4.Press the oval dispensing lever until a steady stream of water is present and flowing steadily into a glass. Continue dispensing until all the water has been dispensed. The system is empty when the white ball on the blue water window is at bottom of window.

5.The Oster® Water Filtration System with PUR® Mineralclear® filter is all ready to go. Refill to MAX fill line, replace cap. The white ball will now be at the top of the blue water window on the front, showing the appliance is full.

6.Repeat the above steps each time a new filter is put into place. The filter life indicator lights will go to red when a new filter is needed.

NOTE: Instructions for Priming the system with a new filter are also located on the underside of the inner cover, for reference.

osterwater.com • 7

Page 4 Page 6
Page 5
Image 5
Oster Chill & Filter Powered Water Dispenser, SPR-063011-566 manual Installing the PUR Mineralclear Water Filter
Page 4 Page 6

Chill & Filter Powered Water Dispenser, SPR-063011-566 specifications

The Oster SPR-063011-566 Chill & Filter Powered Water Dispenser is designed to provide a convenient and efficient solution for hydration at home or in the office. This innovative water dispenser combines advanced filtration technology with a user-friendly design to ensure that you enjoy clean, chilled water at all times.

One of the standout features of this water dispenser is its powerful filtration system. The integrated filter effectively reduces impurities and contaminants from tap water, offering you purified drinking water with every sip. The easy-to-replace filter means you can maintain the quality of your water without hassle, allowing for a worry-free hydration experience.

Another notable characteristic is its chilling capability. The Oster Chill & Filter dispenser can cool water to a refreshing temperature, making it an ideal choice for quenching your thirst on hot days. The chilling system is energy-efficient, ensuring that you can enjoy cold water without incurring high electricity costs. The sleek and modern design of the dispenser adds an element of sophistication to any kitchen or office space, seamlessly blending in with your décor.

The dispenser features a user-friendly interface that makes it easy to operate. Its large capacity water tank means you won’t have to constantly refill it, making it perfect for busy households or work environments where multiple people are using it throughout the day. The easy-access spouts allow for quick dispensing, whether you’re filling a glass, a bottle, or a carafe.

Safety is also a priority with the Oster SPR-063011-566. The unit is equipped with features such as child safety locks on the hot water spout, ensuring that little hands are protected from accidental burns. Additionally, the durable materials used in its construction ensure longevity and reliability.

Overall, the Oster SPR-063011-566 Chill & Filter Powered Water Dispenser represents a harmonious blend of convenience, technology, and safety. Its filtration system, cooling capabilities, and user-friendly design make it a valuable addition to any home or office, promoting healthy hydration in a stylish manner. Whether you’re filling up for a workout or enjoying a refreshing drink with dinner, this dispenser is equipped to meet all your hydration needs.
Top Page Image Contents