Outback Power Systems 30VDC, 250VAC manual Relay LED, Base

FLEXware16 Amp Maximum 30VDC/250VAC Rated Relay and DIN Mount Base with LED

RELAY

LED

SIDE VIEW

BASE

FRONT VIEW

The FLEXware Relay Assembly will activate a two-wire start generator when wired to the AUX output of either an OutBack FX Inverter/Charger or an OutBack Charge Controller. The assembly consists of an LED module and a relay inserted (in one orientation) into a base. The base is mounted onto the DIN rail of any OutBack AC industrial control panel.

Relay Features:

•Rated current - 16 amps AC/DC 8 amps per terminal

•Rated voltage - 30VDC/250VAC

•Coil power draw - 400 mW

•Gold contacts for use in low power situations

•A green LED lights to show the relay energizing when proper voltage is applied to the relay coil connectors.

•Base accommodates connections for wiring the coil, common relay contacts, normally open relay contacts, and normally closed relay contacts.