Outback Power Systems GFX1312E, GFX1424E, GFX1448E

Installation

20 900-0111-01-00 Rev A

Mounting Surface

M8 x 1.25 Stud

Lock Washer

Battery

Cable Lug

13 mm Nut

Flat Washer

Insulator

Figure 9 Required Order of Battery Cable Hardware

CAUTION: Fire Hazard

Never install extra washers or hardware between the mounting surface and the

battery cable lug. The decreased surface area can build up heat.

Install battery cable lug, nuts and washers in the

order illustrated. The battery cable lug should be

the first item installed on the stud. It should make

solid contact with the mounting surface. Do not

install hardware in a different order than shown.

Contents

Main International Series GFX Inverter/Charger Page Important Safety Instructions READ AND SAVE THESE INSTRUCTIONS! Audience Symbols Used Symbol Description Definitions The following is a list of initials, terms, and definitions used in conjunction with this product. Table 1 Terms and Definitions Term Definition General Safety WARNING: Limitations on Use Personal Safety WARNING: Personal Injury Inverter Safety WARNING: Lethal Voltage WARNING: Burn Hazard Battery Safety WARNING: Explosion, Electrocution, or Fire Hazard IMPORTANT: Regulatory Listings Recycling Information Earth 911.com OurEarth.org EuroRecycle.net Table of Contents Table of Contents List of Tables List of Figures Introduction Welcome to OutBack Power Technologies Figure 1 International Series GFX Inverter/Charger Models Introduction Components and Accessories Table 2 Components and Accessories Installed Components Included in Box Planning Applications Figure 3 Applications (Example) Planning 12 Renewable Energy Battery Bank Generator Generator Sizing Page Planning Installation Location and Environmental Requirements Dimensions Tools Required Mounting Terminals and Ports Figure 5 Terminals, Ports, and Features WARNING: Shock Hazard Grounding DC Wiring Page AC Wiring Figure 10 AC Terminals Multiple AC Sources Figure 11 Multiple AC Sources Accessory Wiring Figure 13 ON/OFF Jumper and Connections Figure 12 Accessory Connections AUX Wiring Figure 14 AUX Connections for Vent Fan (Example) Figure 15 AUX Connections for Diversion (Example) 24 Automatic Generator Start (AGS) Figure 16 Two-Wire Generator Start (Example) Figure 17 Three-Wire Generator Start (Example) Single-Inverter Installations Multiple-Inverter Installations (Stacking) Figure 19 OutBack HUB4 and MATE IMPORTANT: Parallel Stacking (Dual-Stack and Larger) Page 30 Three-Phase Stacking Figure 22 Example of Three-Phase Stacking Arrangement (Three Inverters) When installing a three-phase system, the following rules must be observed. IMPORTANT: Page Functional Test Page Page Index F R P O S U X W V