Outback Power Systems GFX1424E, GFX1312E, GFX1448E Components and Accessories, Introduction

(this book)

Introduction

Each model inverter has a single phase output marked with this symbol: ∅ Each inverter puts out a sine wave waveform marked with this symbol:

Components and Accessories

Table 2 Components and Accessories

Installed Components

Battery Terminal Cover, red

Battery Terminal Cover, black

AC Conduit Plate

DC Cover (DCC)

Included in Box

GFX Series Installation Manual

GFX Series Operator’s Manual

“WARNING ELECTRICAL SHOCK” sticker

Remote Temperature Sensor (RTS)

Silicone Grease Packet

DCC (DC COVER)

Covers the DC terminal area and provides space to mount other components such as a DC current shunt.

AC CONDUIT PLATE Connects to AC conduit for installations

which do not utilize OutBack’s optional FLEXware conduit boxes.

BATTERY TERMINAL COVER

Protects terminals from accidental contact. Made of stiff plastic with a snap-on design.

Always keep covers installed during normal operation.

When required, remove covers carefully using a flat-blade screwdriver inserted into the slots on the sides of each cover.

The DCC does not replace the battery terminal covers; they must be installed in addition to the DCC.

Figure 2 GFX Components

10 900-0111-01-00 Rev A