Chapter 5. Using the Terminal Menu
5-14 ATLAS_ 800PLUS User Manual 61200226L1-1
Port Speed
Write security: 2; Read security: 5
Specifies the baud rate of the port. Select either 2400 or 9600. If you are using
Dial for Por t Ty p e , ensure that the Port Speed setting matches the modem baud
rate.
Modem Initialization String
Write security: 2; Read security: 5
Specifies the initialization string for a modem. Refer to your modem docu-
mentation for acceptable initialization strings.
Initialize Modem
Write security: 4; Read security: 5
Sends the Modem Initialization string to the modem. When you select this
command, the following message displays: Please verify a modem is con-
nected to the chain port before continuing. Confirm (y/n). Ensure that a
modem is connected before selecting Y.
Flow Control
Write security: 2; Read security: 5
This option sets the flow control for the chain port. You may configure the
chain port flow control for OFF or H/W (hardware).
SNMP
Write security: 3; Read security: 5
Provides a way to configure SNMP access for the ATLAS_ 800PLUS. For detailed
information on SNMP, refer to “SNMP Management” on page 9-1. The following
options are available for review and editing:
SNMP Access
Write security: 3; Read security: 5
Defines whether SNMP access to the ATLAS_ 800PLUS is enabled or disabled.
Select the appropriate option.
SNMP Communities
Write security: 3; Read security: 5
Defines SNMP manager(s) characteristics. The following options are available
for review and editing: