Atlas 800PLUS Terminal Menu Structure | ADTRAN ATLAS 800PLUS

Chapter 5

Using the Terminal Menu

ATLAS 800PLUS TERMINAL MENU STRUCTURE

The ATLAS 800PLUS uses a multilevel menu structure that contains both menu items and data fields. All menus and data display in the terminal menu window, through which you have complete control of the ATLAS 800PLUS. For details on

connecting to the ATLAS 800PLUS terminal menu, see “Getting Started Using Terminal Menus” on page 3-5.

The terminal menu is the access point to all other operations. Each terminal menu item has several functions and submenus that identify and provide access to spe- cific operations and parameters. Use the chart below to help you work with the

ATLAS 800 PLUS terminal menu.

To do this...	Go to this	For more
	menu...	information...

Review and monitor general system	System Info	See page 5-7.
information for the ATLAS 800 PLUS
Review and monitor system status for the	System Status	See page 5-9.
ATLAS 800 PLUS
Set up the operational configuration for	System Config	See page 5-12.
the ATLAS 800 PLUS
Update settings, transfer files, perform	System Utility	See page 5-18.
system diagnostics, and reboot the ATLAS
800 PLUS
Review and configure settings for each	Modules	See page 5-23.
installed module, including the ATLAS
800PLUS base unit

61200226L1-1

ATLAS 800PLUS User Manual

5-1

Image 53

ADTRAN ATLAS 800PLUS user manual Atlas 800PLUS Terminal Menu Structure

Contents

Atlas 800PLUS Trademarks About this Manual REN/SOC FIC Usoc 61200226L1-1 Affidavit Requirements for Connection to Digital Services Vii Viii Canadian Equipment Limitations 61200226L1-1 Table of Contents Operation Chapter Creating a Dedicated Map Appendix C Warranty and Technical Support Information List of Figures Xvi List of Tables Xviii Atlas 800 Plus Base Unit Product Overview Point-to-Point Circuit Frame Relay Signaling Conversion for Maximum Interoperability Dedicated and Switched Connection Maps in a Single Platform Flexible Network Management and Maintainability Digital Access Cross-Connect System Dacs WAN Overbooking Isdn Access SwitchT1 Bandwidth Manager Configuration and Management Atlas 800PLUS FeaturesSoftware Upgrade Signaling Support Switched Connection Maps Isdn Switch TypesTesting Dedicated Connection Maps Introduction 61200226L1-1 Contents of Adtran Shipments Before Installing the Atlas 800PLUSChecking the Power Connection Customer Provides Rear Panel Grounding Instructions Connection Control In/Chain Control In/Chain In Pinout Control Out/Chain Out Unused RX Data Network ConnectionControl Out/Chain Out Pinout MON Monitor Ethernet 10BaseT ConnectionNetwork Pinout Ethernet 10BaseT Pinout Self-Test Installing Modules Power UP Testing and InitializationOption Slot Arrangement Installation Front Panel Layout Atlas 800 Plus Front Panel Layout ShiftAtlas 800 Plus System LED Description Operation KeysTo do this Press these front panel keys Return to the Main menu from any menu location Channel Service Unit CSU Status Operating the Atlas 800 Plus Getting Started Using the Front PanelGetting Started Using Terminal Menus Telnet Set the Default Gateway IP address typically requiredDefine the IP Address Set the Subnet Mask VT-100 Operation Watch Pro Front Panel LCD Atlas 800PLUS Front Panel Menu Structure Navigating the Front Panel Front Panel Menu Tree Front Panel Main Menu Status Menu Configuration Menu Utility Menu Run Selftest Software RevSelftest Show Results Password ResetTest Checks this Clear Results Active Alarms Alarm Alrm MenuView History Clear History Front Panel Operation and Menu Structure 61200226L1-1 Atlas 800PLUS Terminal Menu Structure Window Panes Navigating the Terminal MenuMenu Path To do this Press one These keys Brief description of currently selected command Shows contents of currently selected menuDisplays information about selected commands Ctrl-A Describes current position in the terminal menu structure Right Window Pane Notation Using the Keyboard KeysThis notation Means that Terminal Menu Navigation Restore factory default settings Configuration KeystrokesSession Management Keystrokes Copy selected items to the clipboard System Information Getting HelpInsert a new list item Delete a list item Installed Memory Startup ModeBoot ROM Rev System Location System Status Rx Frames Tx FramesClear System LED Temp Fail Chain Port Signal Leads ConfigurationData Tables This statistic Does this This option Does this System Configuration Max Telnet Sessions Default GatewayEthernet Port Port Name Port Speed Snmp AccessInitialize Modem Flow Control Authen Trap Transmission Trap TransmissionTraps Destination Trap Filtering Access Passwords Syslog SetupSystem Event Logging Transmission Password Access RightsLabel If you want the user to Select level Module Slot System UtilityActive Module Type Current Update StatusTransfer Method Tftp Server Filename Begin Firmware Update Previous Update StatusConfig Transfer This field Does this Save Config Remotely Load and Use ConfigCurrent Transfer Status Previous Transfer Status TDM RAM Reboot SystemThis test Logs this result Slt Modules No Response TestState Atlas 800PLUS Controller T1/PRI Submenu Items Field Provides this status information DS0 status Means thisPerformance Current Performance 24 Hr Performance 15 Min QRSS/RLB Results Dedicated MapsPattern Map Name Create/Edit MapsSort To/From Connects From Slot From ConfigDS0 Selection DS0 Available Trunk Conditioning Example Trunk Conditioning Defining Trunk Conditioning To ConfigTo Slot Activate Time Network Term Terminations Dial PlanEnbl Day Slot/Port Sig SignallingOutgoing#Accept Source ID Data 64 kbps, Analog, Speech, and Treat Call As Accept NumbersSearch Primary Search Out#Rej Interface ConfigurationReject Numbers Examples In#Accept Signaling User Selection RBS PRISlot/Port Select list of option modules/ports Data 64kbps/Data 56kbps/Analog/Speech Out#Rej Outgoing Number Reject List Treat Call AsData 56kbps/Data 64kbps/Audio/Speech Global Parameters Automatic Routeback Rejection Area Code Quad T1/PRI Module Interface Configuration Interface Configuration Outgoing Caller ID Strip MSDNetwork Specific Facility Voice ID Number ID PresentationSwap ANI/DNIS Quad T1/PRI Module Network Termination/RBS Did Digits Transferred Signaling MethodDirect Inward Dialing Trunk Number Did Prefix Quad T1/PRI Module User Termination/PRI Value for Caller ID to be sent to the Network i.e., 256 963 Quad T1/PRI Module User Termination/RBS Caller ID Number Quad Nx56/64 Module Interface Configuration Octal BRI Module Configuration Spid Number Phone NumberCalls D64 Using the Terminal Menu Dedicated Map Design OverviewData T1-D 1-24 Voice Router PBX Connections Name Configure the PortsDS0s Name DS0s Implement the Map Completed Dedicated Map Understanding the Application RAS PBX Configure the PortsUnderstanding the Dial Plan Type of BRI switch being provided Network PRI Type of PRI switch being providedPlan the Dial Plan Number of digits PRI-A Network Terminations User Termination Implement the Dial PlanBRI D,E,F PRI-B Completed Network Map Completed User Map Creating a Dial Plan 61200226L1-1 Xmodem Firmware Updating Update Firmware Using XmodemFirmware Updating Select Xmodem for the Transfer Method field Update Firmware Menu Interface Updating Firmware Module Slot field Update Firmware Using TftpTftp Firmware Updating Update Firmware Menu Interface Error Access Violation Error File Not FoundError Illegal Operation Error User aborted Basic Components Understanding SnmpNetwork Manager Agent Defining a Trap Destination List TrapsFiltering Traps Standard Traps DS1 Traps DS1 Alarm TrapsStandard Trap Index Trap Names Severity Description Normal Major DS1 Snmp Traps Alarm Severity DescriptionMinor Current interval unavailable DS1 Alert TrapsDS1 Current Alert Snmp Trap Severity Description Total interval unavailable second threshold has Total Alert Traps Severity Description Telnet Utilities Delivered with the Atlas 800PLUSMenu Options Session Menu Connect Add New Edit EntryDelete Disconnect VT-100 Local Echo and Auto Repeat Tftp Server Disable Menu Options Server Menu EnableAbort Print Log To Clipboard Log Field Saving the Current Configuration to a Tftp ServerClear Log To retrieve the configuration from a Tftp server 10-8 Title System Event Logging Config Login FailureCold Start Authen Fail ALM-I ALM-A RED Alrm RED Alrm -AYelw Alrm -A Yelw Alrm TX Yelw TX Yelw -ACH Alrm -A CH Alrm T1 TOT UAS Thrs T1 TOT Sefs ThrsT1 TOT CSS Thrs T1 TOT PCV Thrs Config BRI NT Config BRI LTConfig PRI CO Config PRI CPE Plete Spid Registration Normal BRI NT Registering Spid Spid Registration com Normal BRI NT All SPIDs registeredChan UP Atlas Table A-7.ISDN Cause Codes Cause Code Message Category Timerexpiry InvalidelemcontentsProtocolerror Channotimplemented Table A-8. Cause Code Log Entries Location Appendix A. System Event Logging Table B-1.Troubleshooting Troubleshooting Appendix B. Troubleshooting Product Support Information Warranty and Customer ServicePre-sales Inquiries and Applications Support Post-Sale Support 256 RMA Department Index CTS DCD Index-4 LBO Index-6 PRI RMA C-1 Index-9 Tftp Xmodem Index-12 Product Support Information