Chapter 5. Using the Terminal Menu
Field... | Provides this status information... |
|
|
UAS | Unavailable Seconds. |
|
|
LCV | Line Code Violations. |
|
|
RCV | Path Code. |
|
|
LES | Line Errored Seconds. |
|
|
Performance: 15 Min
Write security: 3; Read security: 5
In the Performance 15 min. menu, the Performance data for the previous 15 minute window is stored. Refer to “Performance: Current” on page
Performance: 24 Hr.
Write security: 3; Read security: 5
In the Performance 24 hr. menu, the performance data for the previous 24 hour window is stored. Refer to “Performance: Current” on page
Configuration
All of the configurable parameters apply to whether the port is connected to a Pri- mary Rate ISDN circuit or a Channelized T1
This Configuration submenu... | Does this... |
|
|
Prt | Identifies the port number. |
Read security: 5 |
|
|
|
Port Name | Accepts any alphanumeric name up to 16 characters |
Write security: 3; Read security: 5 | long to uniquely identify each port. |
|
|
Frame | Matches the frame format of the circuit to which it is |
Write security: 2; Read security: 5 | connected (available from the network supplier). |
|
|
Code | Matches the line code of the circuit to which it is |
Write security: 2; Read security: 5 | connected (available from the network supplier). |
|
|
Tx Yellow | Enables and disables the transmitting of yellow alarms. |
(Auto Tx Yellow Alarm) |
|
Write security: 3; Read security: 5 |
|
|
|
Tx PRMs | Enables and disables the sending of PRM data on the |
(Transmit PRMs) | facility data link (FDL). The PRM data continues to be |
Write security: 3; Read security: 5 | collected even if XMIT PRM is disabled (possible only |
| with ESF format). |
|
|
LBO (Line Build Out) | Depends on whether the circuit is provisioned for DS1 |
Write security: 2; Read security: 5 | by the telephone company. |
|
|
LB Accept (Loopback Accept) | Sets unit to accept or reject the |
Write security: 3; Read security: 5 | loop down codes as defined in ANSI T1.403. This is a |
| line loopback. |
|
|
| ATLAS 800PLUS User Manual |