
Chapter 7. Creating a Dial Plan
Plan the Dial Plan
1.Determine the provisioning of the Network, and the attached equipment (video equipment and PBX).
Network PRI Type of PRI switch being provided:
National ISDN
DMS 100 custom 4ESS custom 5ESS custom
DID- Number of digits
Type of BRI switch being provided:
National ISDN
DMS 100 custom 5ESS custom
SPID(s) and phone number(s) provisioned for the BRI line
User Equipment
PRI
Switch type the user equipment expects to interface to (ATLAS supports 5ESS custom.
DID
Number of digits.
BRI
Switch type the User equipment expects to interface to (ATLAS supports National ISDN, 5ESS custom and DMS 100 custom). SPID and phone numbers provisioned in equipment.
T1 RBS
DID enabled on PBX/Number of digits; Signaling (E&M/Loop Start/Ground Start).
2.Enter the local Area Code number (needed for Caller ID operation) under the Global Parameter submenu below the Dial Plan menu.
3.Determine which ports are Network Terminations and which are User Terminations. Define the phone number acceptance and rejection criteria for each.
| ATLAS 800 PLUS User Manual |