Chapter 3. Operation
OPERATING THE ATLAS 800 PLUS
You can access basic setup functions from the ATLAS 800PLUS front panel. To access all of the ATLAS 800PLUS functions, set up a Telnet session or use a
ATLAS 800PLUS. After you understand the different ways to operate the ATLAS 800PLUS, you will be ready to configure the unit.
Getting Started Using the Front Panel
With the ATLAS 800PLUS
1.Activate Configuration (CONFIG) using the front panel arrow keys or by pressing 2. (The cursor flashes on the number next to the activated selection.) Press Enter.
2.Use the arrow keys to view the submenu items.
3.Select S0) SYSTEM. Press Enter.
4.Activate 2) CHAIN PORT using the arrow keys or by pressing 2. Press Enter.
5.Activate 4) UNIT ID using the arrow keys or by pressing 4. Press Enter.
6.The Unit ID field displays. Type the new Unit ID in this field and press Enter. The new Unit ID is now set.
|
|
|
| S0) SYSTEM |
|
|
|
|
2) CONFIG | S1) |
|
|
|
|
| : |
|
|
|
|
| S8) |
|
|
|
|
1) | ETHERNET |
| 1) BAUD RT 9600 | |
|
|
|
|
|
|
|
| 2) | FLOW CTL |
|
|
|
|
|
2) | CHAIN PORT |
| 3) | TYPE |
|
|
|
|
|
|
|
| 4) | UNIT ID |
|
|
|
|
|
|
|
| 5) | INIT MODEM |
|
|
|
|
|
Figure 3-2. Example of Basic Front Panel Menu Navigation
For detailed information about the commands available through the front panel menus, see “Front Panel Operation and Menu Structure” on page
Getting Started Using Terminal Menus
Terminal menus provide one of the primary means of monitoring and configuring the ATLAS 800PLUS. The terminal menu interface uses the full capabilities of the
| ATLAS 800PLUS User Manual |
