Chapter 5. Using the Terminal Menu

To change the password, follow this procedure:

1.Select the Password field—a new Password field displays.

2.Type the new password in the Enter field.

3.Type the new password again in the Confirm field.

The password can contain up to 12 alphanumeric characters. You can also use spaces and special characters in the password.

Active

Read security: 5

Displays the number of users for each label that are currently logged into the system.

SYSTEM UTILITY

Use the System Utility menu to view and set the system parameters shown in Fig- ure 5-5.

Figure 5-5. System Utility Menu

Update Firmware

Write security: 1; Read security: 5

Updates firmware when ATLAS 800PLUS enhancements are released. Two trans- fer methods are available for use in updating any modules that contain flash memory—including the ATLAS system controller. The first transfer method uses the ATLAS serial Chain-In port of the system controller and XMODEM protocol. The second transfer method uses the ATLAS built-in Ethernet port of the system controller and TFTP (Trivial File Transfer Protocol). For detailed information on how to update firmware, see “Updating Firmware” on page 8-1.

The available update options change depending on whether you select Slot 0, Slots 1 through 8, or All Modules of a Type.

Module Slot

Write security: 1; Read security: 5

Displays the slot you selected for firmware updating. When this option first appears, None Selected displays. Press Enter, and a new field displays allow-

5-18

ATLAS 800PLUS User Manual

61200226L1-1

Page 70
Image 70
ADTRAN ATLAS 800PLUS user manual System Utility, Active, Module Slot