Xmodem Firmware Updating | ADTRAN ATLAS 800PLUS specification

Chapter 8	Updating Firmware

FIRMWARE UPDATING

To provide feature enhancements in the future, the ATLAS supports firmware updating by field personnel. Two transfer methods are available for use in updat- ing any modules that contain Flash memory, including the system controller of the ATLAS. The first transfer method provided is via the ATLAS Chain-In port using XMODEM protocol. The second transfer method provided by ATLAS is via the ATLAS built-in Ethernet port using TFTP (Trivial File Transfer Protocol). To simplify the update procedure, a common menu interface is available for use in updating any upgradable module within ATLAS. The following sections describe the procedure for updating using either transfer method.

Please consult the appropriate ATLAS module manual to determine if the module supports flash upgrading.

XMODEM FIRMWARE UPDATING

The ATLAS 800PLUS supports firmware updating to any upgradable module using XMODEM transfer protocol via the base unit’s Chain-In port. This transfer protocol can be found in most PC communications software packages. To config- ure the Chain-In port’s data rate and other communication parameters, consult the Chain Port Configuration section in the chapter “Installation” on page 2-1.

Ensure the communications software package being used has flow control turned off.

Update Firmware Using XMODEM

1.Obtain the appropriate update file for the particular module from ADTRAN Technical Support. For more information on how to contact ADTRAN Technical Support, refer to “Warranty and Technical Support Information” on page C-1.

2.Log in to ATLAS using a VT-100 terminal emulation communication software package which contains XMODEM protocol support.

61200226L1-1

ATLAS 800PLUS User Manual

8-1

Image 117

ADTRAN ATLAS 800PLUS user manual Xmodem Firmware Updating, Update Firmware Using Xmodem

Contents

Atlas 800PLUS Trademarks About this Manual REN/SOC FIC Usoc 61200226L1-1 Affidavit Requirements for Connection to Digital Services Vii Viii Canadian Equipment Limitations 61200226L1-1 Table of Contents Operation Chapter Creating a Dedicated Map Appendix C Warranty and Technical Support Information List of Figures Xvi List of Tables Xviii Atlas 800 Plus Base Unit Product Overview Point-to-Point Circuit Frame Relay Signaling Conversion for Maximum Interoperability Dedicated and Switched Connection Maps in a Single Platform Flexible Network Management and Maintainability Digital Access Cross-Connect System Dacs Isdn Access Switch T1 Bandwidth ManagerWAN Overbooking Configuration and Management Atlas 800PLUS FeaturesSoftware Upgrade Signaling Support Switched Connection Maps Isdn Switch TypesTesting Dedicated Connection Maps Introduction 61200226L1-1 Contents of Adtran Shipments Before Installing the Atlas 800PLUSChecking the Power Connection Customer Provides Rear Panel Grounding Instructions Connection Control In/Chain Control In/Chain In Pinout Control Out/Chain Out Network Connection Control Out/Chain Out PinoutUnused RX Data MON Monitor Ethernet 10BaseT ConnectionNetwork Pinout Ethernet 10BaseT Pinout Installing Modules Power UP Testing and Initialization Option Slot ArrangementSelf-Test Installation Front Panel Layout Shift Atlas 800 PlusAtlas 800 Plus Front Panel Layout System LED Description Operation KeysTo do this Press these front panel keys Return to the Main menu from any menu location Channel Service Unit CSU Status Getting Started Using the Front Panel Getting Started Using Terminal MenusOperating the Atlas 800 Plus Telnet Set the Default Gateway IP address typically requiredDefine the IP Address Set the Subnet Mask VT-100 Operation Watch Pro Front Panel LCD Atlas 800PLUS Front Panel Menu Structure Navigating the Front Panel Front Panel Menu Tree Front Panel Main Menu Status Menu Configuration Menu Utility Menu Software Rev SelftestRun Selftest Show Results Password ResetTest Checks this Clear Results Active Alarms Alarm Alrm MenuView History Clear History Front Panel Operation and Menu Structure 61200226L1-1 Atlas 800PLUS Terminal Menu Structure Navigating the Terminal Menu Menu PathWindow Panes To do this Press one These keys Brief description of currently selected command Shows contents of currently selected menuDisplays information about selected commands Ctrl-A Describes current position in the terminal menu structure Right Window Pane Notation Using the Keyboard KeysThis notation Means that Terminal Menu Navigation Restore factory default settings Configuration KeystrokesSession Management Keystrokes Copy selected items to the clipboard System Information Getting HelpInsert a new list item Delete a list item Installed Memory Startup ModeBoot ROM Rev System Location System Status Rx Frames Tx FramesClear System LED Temp Fail Chain Port Signal Leads ConfigurationData Tables This statistic Does this This option Does this System Configuration Max Telnet Sessions Default GatewayEthernet Port Port Name Port Speed Snmp AccessInitialize Modem Flow Control Authen Trap Transmission Trap TransmissionTraps Destination Trap Filtering Access Passwords Syslog SetupSystem Event Logging Transmission Password Access RightsLabel If you want the user to Select level System Utility ActiveModule Slot Module Type Current Update StatusTransfer Method Tftp Server Filename Begin Firmware Update Previous Update StatusConfig Transfer This field Does this Save Config Remotely Load and Use ConfigCurrent Transfer Status Previous Transfer Status Reboot System This test Logs this resultTDM RAM Slt Modules Test StateNo Response Atlas 800PLUS Controller T1/PRI Submenu Items DS0 status Means this Performance CurrentField Provides this status information Performance 24 Hr Performance 15 Min Dedicated Maps PatternQRSS/RLB Results Map Name Create/Edit MapsSort To/From Connects From Slot From ConfigDS0 Selection DS0 Available Trunk Conditioning Example Trunk Conditioning Defining Trunk Conditioning To ConfigTo Slot Activate Time Dial Plan Enbl DayNetwork Term Terminations Slot/Port Sig SignallingOutgoing#Accept Source ID Data 64 kbps, Analog, Speech, and Treat Call As Accept NumbersSearch Primary Search Out#Rej Interface ConfigurationReject Numbers Examples Signaling User Selection RBS PRI Slot/Port Select list of option modules/portsIn#Accept Data 64kbps/Data 56kbps/Analog/Speech Out#Rej Outgoing Number Reject List Treat Call AsData 56kbps/Data 64kbps/Audio/Speech Global Parameters Automatic Routeback Rejection Area Code Quad T1/PRI Module Interface Configuration Interface Configuration Strip MSD Network Specific Facility VoiceOutgoing Caller ID ID Number ID PresentationSwap ANI/DNIS Quad T1/PRI Module Network Termination/RBS Signaling Method Direct Inward DialingDid Digits Transferred Trunk Number Did Prefix Quad T1/PRI Module User Termination/PRI Value for Caller ID to be sent to the Network i.e., 256 963 Quad T1/PRI Module User Termination/RBS Caller ID Number Quad Nx56/64 Module Interface Configuration Octal BRI Module Configuration Spid Number Phone NumberCalls D64 Using the Terminal Menu Dedicated Map Design OverviewData T1-D 1-24 Voice Router PBX Connections Name Configure the PortsDS0s Name DS0s Implement the Map Completed Dedicated Map Understanding the Application Configure the Ports Understanding the Dial PlanRAS PBX Type of BRI switch being provided Network PRI Type of PRI switch being providedPlan the Dial Plan Number of digits PRI-A Network Terminations User Termination Implement the Dial PlanBRI D,E,F PRI-B Completed Network Map Completed User Map Creating a Dial Plan 61200226L1-1 Update Firmware Using Xmodem Firmware UpdatingXmodem Firmware Updating Select Xmodem for the Transfer Method field Update Firmware Menu Interface Updating Firmware Update Firmware Using Tftp Tftp Firmware UpdatingModule Slot field Update Firmware Menu Interface Error Access Violation Error File Not FoundError Illegal Operation Error User aborted Basic Components Understanding SnmpNetwork Manager Agent Defining a Trap Destination List TrapsFiltering Traps Standard Traps DS1 Traps DS1 Alarm TrapsStandard Trap Index Trap Names Severity Description Normal DS1 Snmp Traps Alarm Severity Description MinorMajor DS1 Alert Traps DS1 Current Alert Snmp Trap Severity DescriptionCurrent interval unavailable Total interval unavailable second threshold has Total Alert Traps Severity Description Telnet Utilities Delivered with the Atlas 800PLUSMenu Options Session Menu Connect Add New Edit EntryDelete Disconnect VT-100 Local Echo and Auto Repeat Tftp Server Disable Menu Options Server Menu EnableAbort Print Log To Clipboard Saving the Current Configuration to a Tftp Server Clear LogLog Field To retrieve the configuration from a Tftp server 10-8 Title System Event Logging Config Login FailureCold Start Authen Fail ALM-I ALM-A RED Alrm RED Alrm -AYelw Alrm -A Yelw Alrm TX Yelw TX Yelw -ACH Alrm -A CH Alrm T1 TOT UAS Thrs T1 TOT Sefs ThrsT1 TOT CSS Thrs T1 TOT PCV Thrs Config BRI NT Config BRI LTConfig PRI CO Config PRI CPE Plete Spid Registration Normal BRI NT Registering Spid Spid Registration com Normal BRI NT All SPIDs registeredChan UP Atlas Table A-7.ISDN Cause Codes Cause Code Message Category Timerexpiry InvalidelemcontentsProtocolerror Channotimplemented Table A-8. Cause Code Log Entries Location Appendix A. System Event Logging Table B-1.Troubleshooting Troubleshooting Appendix B. Troubleshooting Product Support Information Warranty and Customer ServicePre-sales Inquiries and Applications Support Post-Sale Support 256 RMA Department Index CTS DCD Index-4 LBO Index-6 PRI RMA C-1 Index-9 Tftp Xmodem Index-12 Product Support Information