Chapter 4. Front Panel Operation and Menu Structure

Configuration Menu

The Config menu branch provides limited configuration control of the

ATLAS 800PLUS.

S0 System

S0) System displays configuration options that are available for the

ATLAS 800PLUS Base Unit. Choose from Ethernet Configuration (see “Ethernet Configuration” on page 4-5) or Chain Port Configuration (see “Chain Port Configu- ration” on page 4-5).

Ethernet Configuration

Ethernet Configuration allows you to create and change settings for the 10BaseT Ethernet connection.

IP Address

This is the address that uniquely identifies the ATLAS 800PLUS on a TCP/IP network. This address is composed of four decimal num- bers, each in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by default. The IP address is used for the 10BaseT Ether- net interface. Obtain the correct IP address from your LAN adminis- trator. Enter the IP address by entering each number followed by Enter to move to the next field.

You must define the IP address before attempting to use a Telnet program.

Subnet Mask

This option defines which part of a destination IP address is the Net- work number. This address is composed of four decimal numbers, each in the range of 0 to 255, separated by periods. This option is used

along with the ATLAS 800PLUS IP address to determine which nodes must be reached through the default IP gateway. Enter the subnet mask address by entering each number followed by Enter to move to the next field.

Def Gateway

This option allows you to define or change the default gateway. You will need a default gateway if the LAN contains multiple segments. This address is composed of four decimal numbers, each in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by default. Contact your LAN administrator for the appropriate address. Enter the default gateway address by entering each number followed by Enter to move to the next field.

Chain Port Configuration

The Chain Port menu option modifies selected items in its menu branch.

Baud Rt

This option displays and changes the baud rate. The supported baud rates for the chain port include 2400 and 9600 bps. If Type is set to Dial, make sure this field matches the modem baud rate.

61200226L1-1

ATLAS 800PLUS User Manual

4-5

Page 47
Image 47
ADTRAN ATLAS 800PLUS user manual Configuration Menu