Chapter 5. Using the Terminal Menu
Max Telnet Sessions
Write security: 3; Read security: 5
Defines the maximum number of Telnet sessions that can be active at the same time. Enter a number between 0 and 100 in this field.
If you enter zero in this field, you will not be able to use Telnet. Only enter zero if you want to completely lock out Telnet access.
Ethernet Port
Write security: 2; Read security: 5
Provides a way to configure various settings for the Ethernet port. The following options are available for review and editing:
Port Name
Defines the name of the Ethernet port. You can leave this field blank.
IP Address
Lists the address assigned to the base Ethernet port. This address is com- posed of four decimal numbers, each in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by default. The IP address is used for the 10BaseT Ethernet interface. Obtain the correct IP address from your LAN administrator.
Default Gateway
Defines or changes the default gateway. Enter the default gateway address by entering a decimal number into the appropriate field and then pressing Enter to move to the next field. You will need a default gateway if the LAN contains multiple segments. This address is composed of four decimal numbers, each in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by default. Contact your LAN administrator for the appropriate address.
Subnet Mask
Defines which part of a destination IP address contains the network number. This address is composed of four decimal numbers, each in the range of 0 to 255, separated by periods. This value is set to 0.0.0.0 by default. This part of the destination IP address is used along with the ATLAS 800PLUS IP address to determine which nodes must be reached through the default IP gateway.
Chain Port
Write security: 2; Read security: 5
Supplies options for configuring the
Port Name
Write security: 2; Read security: 5
Defines the name of the chain port. Type in an
Port Type
Write security: 2; Read security: 5
Specifies whether you use Direct or Dial mode.
| ATLAS 800PLUS User Manual |
