Chapter 5. Using the Terminal Menu
#
Displays the number of the dedicated map connection. If you press I
in this field, ATLAS 800PLUS adds another dedicated map connec- tion, numbered consecutively.
FROM Slot
Write security: 3; Read security: 5
Specifies the slot to use for the FROM connection. Select this option, and a list of all of the slots and the modules installed in the slots dis- plays. Pick the appropriate slot.
Port
Write security: 3; Read security: 5
Specifies the port in the selected slot to use for the FROM connection.
From Config
Write security: 3; Read security: 5
Specifies the configuration for the FROM connection. The selections displayed in this field are based on the type of module selected in the From Slot option. You must input the following
DS0 Selection
Write security: 3; Read security: 5
If the selected entry is a T1 port, use this field to define which DS0s will be used for this connection. You can enter the DS0s in several ways. For example, to enter DS0s one through five, enter
DS0 Available
Read security: 5
Indicates which DS0s of the T1 are assigned. DS0 assignment is depicted based on the following items:
digits | This DS0 is available. The digit that displays in this |
field represents the last digit of the DS0 number. | |
|
|
* | This port is requesting this DS0 for this connection, |
| but the DS0 is not yet activated. |
|
|
! | This DS0 is used by this port in this connection and is |
| activated. |
|
|
s | This DS0 is used in the switched Dial Plan. |
|
|
S | This DS0 is used in the switched Dial Plan and |
| conflicts with this connection. |
|
|
n | This DS0 is already used in this dedicated map. |
|
|
N | This DS0 is already used in this dedicated map and |
| conflicts with this connection. |
|
|
Data Rate
Write security: 3; Read security: 5
If the FROM slot is an Nx port, use this field to define the data rate per DS0. You can choose from 64 Kbps or 56 kbps. If the FROM slot is an Nx port, the data rate per DS0 must be set.
ATLAS 800PLUS User Manual |
|
