Alarm Alrm Menu, Active Alarms, View History | ADTRAN ATLAS 800PLUS

Chapter 4. Front Panel Operation and Menu Structure

Alarm (ALRM) Menu

From the terminal menus you can view a log of system events. To control the types of events logged, a series of filters have been defined for each event source (System, T1/PRI, ISDN, Ethernet, etc.). Any event with a severity greater than, or equal to, the threshold defined in the event logging filter list is logged to the sys- tem event log. Events that do not appear in the event log do not appear in the front panel alarm lists. Therefore, the event logging filters are applied to both the terminal and the front panel menu lists. See “System Event Logging” on page 5-16 for details on setting the thresholds for event logging.

Active Alarms

This menu item displays a list of current alarms reported by the base controller. If no alarms are current, this menu item displays End of List. If there are current alarms, this display includes two lines of text. The top line is the alarm source. The bottom line is the alarm message.

View History

This option displays a time and date-stamped list of the alarms that have occurred in the ATLAS 800PLUS. Some alarm types include -Ato indicate the alarm is active and -Ito indicate the alarm is inactive.

Clear History

This option clears the alarm history log.

When you clear the alarm history log, you cannot retrieve the data.

61200226L1-1

ATLAS 800PLUS User Manual

4-9

Image 51

ADTRAN ATLAS 800PLUS user manual Alarm Alrm Menu, Active Alarms, View History, Clear History

Contents

Atlas 800PLUS Trademarks About this Manual REN/SOC FIC Usoc 61200226L1-1 Affidavit Requirements for Connection to Digital Services Vii Viii Canadian Equipment Limitations 61200226L1-1 Table of Contents Operation Chapter Creating a Dedicated Map Appendix C Warranty and Technical Support Information List of Figures Xvi List of Tables Xviii Atlas 800 Plus Base Unit Product Overview Point-to-Point Circuit Frame Relay Signaling Conversion for Maximum Interoperability Dedicated and Switched Connection Maps in a Single Platform Flexible Network Management and Maintainability Digital Access Cross-Connect System Dacs Isdn Access Switch T1 Bandwidth ManagerWAN Overbooking Signaling Support Atlas 800PLUS FeaturesConfiguration and Management Software Upgrade Dedicated Connection Maps Isdn Switch TypesSwitched Connection Maps Testing Introduction 61200226L1-1 Customer Provides Before Installing the Atlas 800PLUSContents of Adtran Shipments Checking the Power Connection Rear Panel Grounding Instructions Connection Control In/Chain Control In/Chain In Pinout Control Out/Chain Out Network Connection Control Out/Chain Out PinoutUnused RX Data Ethernet 10BaseT Pinout Ethernet 10BaseT ConnectionMON Monitor Network Pinout Installing Modules Power UP Testing and Initialization Option Slot ArrangementSelf-Test Installation Front Panel Layout Shift Atlas 800 PlusAtlas 800 Plus Front Panel Layout Return to the Main menu from any menu location Operation KeysSystem LED Description To do this Press these front panel keys Channel Service Unit CSU Status Getting Started Using the Front Panel Getting Started Using Terminal MenusOperating the Atlas 800 Plus Set the Subnet Mask Set the Default Gateway IP address typically requiredTelnet Define the IP Address VT-100 Operation Watch Pro Front Panel LCD Atlas 800PLUS Front Panel Menu Structure Navigating the Front Panel Front Panel Menu Tree Front Panel Main Menu Status Menu Configuration Menu Utility Menu Software Rev SelftestRun Selftest Clear Results Password ResetShow Results Test Checks this Clear History Alarm Alrm MenuActive Alarms View History Front Panel Operation and Menu Structure 61200226L1-1 Atlas 800PLUS Terminal Menu Structure Navigating the Terminal Menu Menu PathWindow Panes To do this Press one These keys Describes current position in the terminal menu structure Shows contents of currently selected menuBrief description of currently selected command Displays information about selected commands Ctrl-A Terminal Menu Navigation Using the Keyboard KeysRight Window Pane Notation This notation Means that Copy selected items to the clipboard Configuration KeystrokesRestore factory default settings Session Management Keystrokes Delete a list item Getting HelpSystem Information Insert a new list item System Location Startup ModeInstalled Memory Boot ROM Rev System Status Temp Fail Tx FramesRx Frames Clear System LED This option Does this ConfigurationChain Port Signal Leads Data Tables This statistic Does this System Configuration Port Name Default GatewayMax Telnet Sessions Ethernet Port Flow Control Snmp AccessPort Speed Initialize Modem Trap Filtering Trap TransmissionAuthen Trap Transmission Traps Destination Transmission Syslog SetupAccess Passwords System Event Logging If you want the user to Select level Access RightsPassword Label System Utility ActiveModule Slot Tftp Server Filename Current Update StatusModule Type Transfer Method This field Does this Previous Update StatusBegin Firmware Update Config Transfer Previous Transfer Status Load and Use ConfigSave Config Remotely Current Transfer Status Reboot System This test Logs this resultTDM RAM Slt Modules Test StateNo Response Atlas 800PLUS Controller T1/PRI Submenu Items DS0 status Means this Performance CurrentField Provides this status information Performance 24 Hr Performance 15 Min Dedicated Maps PatternQRSS/RLB Results Connects Create/Edit MapsMap Name Sort To/From DS0 Available From ConfigFrom Slot DS0 Selection Trunk Conditioning Example Trunk Conditioning Activate Time To ConfigDefining Trunk Conditioning To Slot Dial Plan Enbl DayNetwork Term Terminations Source ID Sig SignallingSlot/Port Outgoing#Accept Primary Search Accept NumbersData 64 kbps, Analog, Speech, and Treat Call As Search Examples Interface ConfigurationOut#Rej Reject Numbers Signaling User Selection RBS PRI Slot/Port Select list of option modules/portsIn#Accept Data 64kbps/Data 56kbps/Analog/Speech Global Parameters Treat Call AsOut#Rej Outgoing Number Reject List Data 56kbps/Data 64kbps/Audio/Speech Automatic Routeback Rejection Area Code Quad T1/PRI Module Interface Configuration Interface Configuration Strip MSD Network Specific Facility VoiceOutgoing Caller ID Quad T1/PRI Module Network Termination/RBS ID PresentationID Number Swap ANI/DNIS Signaling Method Direct Inward DialingDid Digits Transferred Trunk Number Did Prefix Quad T1/PRI Module User Termination/PRI Value for Caller ID to be sent to the Network i.e., 256 963 Quad T1/PRI Module User Termination/RBS Caller ID Number Quad Nx56/64 Module Interface Configuration Octal BRI Module Configuration D64 Phone NumberSpid Number Calls Using the Terminal Menu Router PBX OverviewDedicated Map Design Data T1-D 1-24 Voice DS0s Configure the PortsConnections Name DS0s Name Implement the Map Completed Dedicated Map Understanding the Application Configure the Ports Understanding the Dial PlanRAS PBX Number of digits Network PRI Type of PRI switch being providedType of BRI switch being provided Plan the Dial Plan PRI-A Network Terminations PRI-B Implement the Dial PlanUser Termination BRI D,E,F Completed Network Map Completed User Map Creating a Dial Plan 61200226L1-1 Update Firmware Using Xmodem Firmware UpdatingXmodem Firmware Updating Select Xmodem for the Transfer Method field Update Firmware Menu Interface Updating Firmware Update Firmware Using Tftp Tftp Firmware UpdatingModule Slot field Update Firmware Menu Interface Error User aborted Error File Not FoundError Access Violation Error Illegal Operation Agent Understanding SnmpBasic Components Network Manager Standard Traps TrapsDefining a Trap Destination List Filtering Traps Normal DS1 Alarm TrapsDS1 Traps Standard Trap Index Trap Names Severity Description DS1 Snmp Traps Alarm Severity Description MinorMajor DS1 Alert Traps DS1 Current Alert Snmp Trap Severity DescriptionCurrent interval unavailable Total interval unavailable second threshold has Total Alert Traps Severity Description Session Menu Connect Utilities Delivered with the Atlas 800PLUSTelnet Menu Options Disconnect Edit EntryAdd New Delete VT-100 Local Echo and Auto Repeat Tftp Server Print Log To Clipboard Menu Options Server Menu EnableDisable Abort Saving the Current Configuration to a Tftp Server Clear LogLog Field To retrieve the configuration from a Tftp server 10-8 Title System Event Logging Authen Fail Login FailureConfig Cold Start ALM-I ALM-A Yelw Alrm RED Alrm -ARED Alrm Yelw Alrm -A CH Alrm TX Yelw -ATX Yelw CH Alrm -A T1 TOT PCV Thrs T1 TOT Sefs ThrsT1 TOT UAS Thrs T1 TOT CSS Thrs Config PRI CPE Config BRI LTConfig BRI NT Config PRI CO Atlas Spid Registration com Normal BRI NT All SPIDs registeredPlete Spid Registration Normal BRI NT Registering Spid Chan UP Table A-7.ISDN Cause Codes Cause Code Message Category Channotimplemented InvalidelemcontentsTimerexpiry Protocolerror Table A-8. Cause Code Log Entries Location Appendix A. System Event Logging Table B-1.Troubleshooting Troubleshooting Appendix B. Troubleshooting Post-Sale Support Warranty and Customer ServiceProduct Support Information Pre-sales Inquiries and Applications Support 256 RMA Department Index CTS DCD Index-4 LBO Index-6 PRI RMA C-1 Index-9 Tftp Xmodem Index-12 Product Support Information