SETUP
ALARM INPUT
Press 
+ 
buttons on remote controller to select ALARM INPUT in SETUP menu.
z RECORDING | Select recording Channel (1~16 Ch) and record- |
CH / QUALITY | ing image QUALITY. |
| (Normal → Good → Better → Best → No Rec). |
zMAIN CH Select Channel to display by full screen at alarm action (1~16 Ch).
zMESSAGE Type TEXT to show on screen at alarm action using screen keyboard (Max 15 characters).
z OUT | Select alarm OUT channel (Alarm out 1~16). |
zDURATION Select alarm DURATION time (5 → 10 sec).
zACTIVE TIME Set alarm operating time.(Active time window will be appeared.)
MOTION ALARM OUTPUT
Press 
+ 
buttons on remote controller to select MOTION ALARM OUTPUT in SETUP menu.
zMOTION ALARM Select using MOTION detect function or not.
Select alarm OUT channel (Alarm out 1~16).
zDURATION Select alarm DURATION time (5 → 10 sec).
Set alarm operating time.(Active time window will be appeared.)
REMOTE CONTROLLER
Press 
+ 
buttons on remote controller to select REMOTE CONTROLLER in SETUP menu.
z BUTTON BEEP | Select whether to make a beep when |
| you press the button on the remote |
| controller. |
z ID CONTROL | Enable “ID CONTROL” function to |
| control the selected one by using DVR |
| ID when several DVRs are installed in |
| the same place. |
z DVR ID | Select a number of DVR ID. |
If several DVRs are installed, you can control DVRs totally or selectively using one remote controller. If the DVR has the same DVR ID, it will be controlled simultane- ously. If you want to control a specific DVR, check the 
ID CONTROL and select one DVR ID on DVR ID tab.
36
