SETUP
2.INTERNET & NETWORK
Set Network Connection and DDNS in INTERNET & NETWORK.
NETWORK CONNECTION
Press 
+ 
buttons on remote controller to select NETWORK CONNECTION in SETUP menu.
zNETWORK TYPE Select either STATIC IP or DHCP.
A STATIC IP address is a number (in the form of a dotted quad) that is assigned to a computer by an Internet service provider (ISP) to be its permanent address on the Internet.
Short for Dynamic Host Configuration Protocol(DHCP), a protocol for assigning dynamic IP addresses to devices on a network.With dynamic addressing, a device may have a different IP address every time it connects to the network.
z IP ADDRESS | Type the IP Address when you select |
| STATIC IP. |
z SUBNET MASK | Type the Subnet Mask when you select |
| STATIC IP. |
z GATEWAY | Type the Gateway when you select |
| STATIC IP. |
z PRIMARY DNS | Primary DNS is used to refer the DVR’s |
| IP address to a preferred domain name. |
zSECONDARY DNS Secondary DNS is used to refer the DVR’s IP address for backup domain name.
NOTICE
When you select DHCP and press APPLY button 
, allocated IP information will be displayed.
SERVICE PORT & DDNS
Press 
+ 
buttons on remote controller to select SERVICE PORT & DDNS in SETUP menu.
zWEB SERVICE PORT Type the web service port number. (Port No: 1 ~ 65534)
z USE DDNS | If you want to use DDNS, please select |
| here. |
z DDNS ID | Type the DDNS Name. |
z CHECK ID | Please click the CHECK ID button for |
| register and change settings. |
NOTICE
When WEB SERVICE PORT was set by 80 in 2. INTERNET & NETWORK - 
SERVICE PORT & DDNS menus, type ip address or domain into the address bar in Microsoft® Internet Explorer™ However, when port number is not 80, you must type port number behind IP address or domain. (ex. http://IP address or domain:port number)
If the registered DDNS ID is “dvr” and DDNS SERVER is “webdvr.net”, you can connect to the DVR by entering the full domain name,“dvr.webdvr.net”, through the Microsoft® Internet Explorer™ If your DVR is installed under a firewall or internet sharing router, you should set port forwarding, DMZ and other settings.
28
