ADTRAN ATLAS 800PLUS user manual Status Menu

Chapter 4. Front Panel Operation and Menu Structure

Status Menu

The Status menu branch lets you view the status of the ATLAS 800PLUS Base Unit and any installed modules.

S0 System

The S0) System option displays status options that are available for the

ATLAS 800PLUS Base Unit. Choose from Ethernet (see “Ethernet Status” on page 4-4) or Chain Port (see “Chain Port Status” on page 4-4).

Ethernet Status

This read-only option shows the status of the 10BaseT Ethernet connection port. The following port status options display in the LCD window. An aster- isk (*) indicates activity for the item.

Port status ...	Means that...
TX	Data is being transmitted from the 10BaseT
	port on the system controller.
RX	Data is being received on the 10BaseT port.
LNK	Indicates the current status of the 10BaseT link
	integrity test (should always be on when the
	unit is connected to a functional 10BaseT hub).

Chain Port Status

This read-only option indicates the status of the Chain Port. The following port status options display in the LCD window. An asterisk (*) indicates activ- ity for the item.

Port status...	Means that...
RTS	Request to send.
CTS	Clear To send.
DTR	Data terminal ready.
DCD	Data carrier detect.

S1 through S8 (modules)

Select options S1 through S8 to display the current status of installed modules. S1 corresponds to slot 1, S2 to slot 2, and so on. When you select one of these options, an expanded description of the card status displays. The status types include ON (Online), OFF (Offline), NRSP (No Response), NRDY (Not Ready), and RST (Restarting).

4-4 ATLAS 800PLUS User Manual 61200226L1-1