Chapter 5. Using the Terminal Menu

Chain Port Overrun Errs

Read security: 5

Displays the number of overrun errors. This field is read-only.

Chain Port Framing Errs

Read security: 5

Displays the number of received framing errors. This field is read-only.

SYSTEM CONFIGURATION

The System Config menu allows you to set up the ATLAS operational configura- tion. Figure 5-4 shows the items included in this menu.

Figure 5-4. System Configuration Menu

Primary Timing Source Write security: 3; Read security: 5

Selects the primary timing source. You can select either INTERNAL or a port from one of the installed modules.

Backup Timing Source

Write security: 3; Read security: 5

Selects the secondary timing source. You can select either INTERNAL or a port from one of the installed modules. ATLAS 800PLUS uses the backup timing source if the primary timing source goes into alarm. The Backup Timing Source should be different from the Primary Timing Source.

ADLP Address

Write security: 2; Read security: 5

Shows the system ADTRAN Data Link Layer Protocol (ADLP) address for con- necting remote devices to management software (such as T-Watch PRO). The allowable range is between 2 and 65520. Enter a value not used by any of the TSU units controlled by the management software.

Session Timeout

Write security: 3; Read security: 5

Defines the number of seconds the terminal session must remain idle before the session times out. You can enter zero to deactivate this option (the session will never time out).

5-12

ATLAS 800PLUS User Manual

61200226L1-1

Page 64
Image 64
ADTRAN ATLAS 800PLUS user manual System Configuration