ADTRAN ATLAS 800PLUS user manual Implement the Dial Plan, User Termination, Bri D,E,F, Pri-B, 5ESS

				Chapter 7. Creating a Dial Plan
		For User Termination, there is one PRI, one RBS T1, and three BRIs
		(see Table 7-2 on page 7-5).
		Table 7-2. User Termination
NAME	PORT	INCOMING	OUTGOING	OTHER
		ACCEPT #	REJECT #
BRI D,E,F	Octal BRI	888-1001 (D);	Blank - No called	BRI type:
		888-1002 (E);	number will be
	Slot 1, Port 4-5,6	888-1003 (F)	rejected.	5ESS SPID # to match Video
				Equipment provisioning.
				Phone numbers:
				888-1001 (D);
				888-1002 (E);
				888-1003 (F)
				Phone numbers must match
				phone numbers provisioned in
				video equipment.
PRI-B	Controller T1	888-1010	Blank - No called	PRI type:
			number will be
	Slot 0, Port 2	Forms a hunt	rejected.	5ESS
		group.		Must match RAS equipment.
				DID=none
T1-A	Slot 2, Port 1	821-8XXX	1-900-$	RBS 1st DS0=1; #DS0 = 24
		Accepts all	Rejects all calls	Signalling = E&M wink
		calls	beginning with	DID = Enable/# of digits = 4
		beginning with	1-900.
		821-8.

Implement the Dial Plan

1.Using the terminal menus, navigate to the Dial Plan menu.

2.Select the Global Parameter submenu. Select the Area Code option and enter the area code. Press Enter when you’re done.

3.Navigate to the Dial Plan submenu and select Network Term (Terminations).

4.For PRI A, select Slot 0/Port 1. Select PRI under Sig to define to ATLAS the interface type to be PRI.

61200226L1-1 ATLAS 800 PLUS User Manual 7-5