Chapter 5. Using the Terminal Menu

DS0s Available Read security: 5

Indicates which DS0s of the T1 have been defined in this switched end point (indicated by “! “), in another switched end point (indicated by “s”), or in a Dedi- cated Map (indicated by “n”). This field is read-only.

The following symbols may display in this field:

digits 0—9

This DS0 is available. The digit that displays in this field

 

represents the last digit of the DS0 number.

 

 

*

This port is requesting this DS0 for this connection, but the

 

DS0 is not yet activated.

 

 

!

This DS0 is used by this port in this connection and is

 

activated.

 

 

s

This DS0 is used in the switched Dial Plan.

 

 

S

This DS0 is used in the switched Dial Plan and conflicts with

 

this connection.

 

 

n

This DS0 is already used in this dedicated map.

 

 

N

This DS0 is already used in this dedicated map and conflicts

 

with this connection.

 

 

Trunk Type (Voice/SW56) Write security: 3; Read security: 5

This is used if the incoming service on this trunk is Switched 56 digital instead of standard voice.

Signaling Method

Write security: 3; Read security: 5

This defines to ATLAS the type of signaling to be used across this trunk. The sig- naling selected needs to match the signaling being provided by the Network (PSTN). The following choices are available:

E&M Immediate

E&M Wink

Loop Start

Ground Start

Direct Inward Dialing

Write security: 3; Read security: 5

This defines to ATLAS whether or not DID is being used by the Network. If DID is Enabled, then the following information must be defined:

DID Digits Transferred

Write security: 3; Read security: 5

Defines the number of digits sent to ATLAS from the Network if DID is used.

5-44

ATLAS 800PLUS User Manual

61200226L1-1

Page 96
Image 96
ADTRAN ATLAS 800PLUS user manual Signaling Method, Direct Inward Dialing, Did Digits Transferred