Chapter 5. Using the Terminal Menu
5-22 ATLAS_ 800PLUS User Manual 61200226L1-1
View Self-test Log
Read security: 5
Displays a read-only, time-stamped log of the tests conducted and the Pass/
Fail results. The tests associated with the system controller include the follow-
ing:
The self-test also verifies data integrity and processor control to each port.
Each port is looped back and a data pattern is sent and tested. The result of
the test on each installed port is listed with Pass/Fail results. A typical test log
is shown in Figure 5-6.
Figure 5-6. View Self-test Log
Clear Self-test Log
Write security: 3; Read security: 5
Clears the self-test log.
Reboot System
Write security: 2; Read security: 5
Reboots the ATLAS_ 800PLUS. When you select this command, the following mes-
sage displays:
Warning! This will reboot the entire system! Confirm (y/n).
Select Y to reboot the system, or N to exit the command.
This test... Logs this result...
Flash Flash memory checksum verified.
BootRom Boot ROM checksum verified.
DSP RAM Memory associated with the DTMF DSP.
RTC RAM Memory associated with the real time clock.
TDM RAM Memory associated with mapping TDM bandwidth.
DRAM Dynamic RAM used for program execution.