ADTRAN ATLAS 800PLUS user manual Contacting Server, Beginning Tftp Transfer, Tftp Completed

Chapter 8. Updating Firmware

15.The Previous Update Status field indicates the results of the last firmware update for the particular slot chosen. If a firmware update has not been attempted for the particular slot, the Previous Update Status will display Has not been attempted.

16.After completing the configuration of all the above parameters, select the Begin Firmware Update field to activate the update process. This field requires user confirmation and will set up the module to initiate a TFTP upload with the specified network server. Once the update process begins, this field changes to Cancel Update to allow you to cancel the current update in progress.

17.During the TFTP upload process, various status messages will be provided in the Current Update Status field to indicate progress. These are described as follows:

TFTP -	Indicates communication with the TFTP
Contacting Server	network server is trying to be established
	with the specified server address in the
	TFTP Server IP Address field.
TFTP -	Indicates communication with the TFTP
Beginning TFTP Transfer	network server has been established and
	the update file is being transferred
	between ATLAS and the TFTP network
	server.
TFTP - Completed	Indicates the ATLAS product successfully
	received the update file.
TFTP -	Indicates the TFTP network server was
Error: File Not Found	unable to locate the specified file name or
	path in the TFTP Server Filename field.
TFTP -	Indicates the TFTP network server denied
Error: Access Violation	ATLAS access to the given update file
	name and path. Please verify
	appropriate user rights are selected for
	the specified path.
TFTP -	An unknown operation was detected by
Error: Illegal Operation	ATLAS when transferring the update file
	from the TFTP network server.
TFTP -	Indicates the user selected Cancel Update
Error: User aborted	to abort reception of the update file from
	the TFTP network server.

18.When the update process has completed successfully, the menu screen will display Idle in the Current Update Status field and Module Update Complete in the Previous Update Status field. In the event an error occurred during the update process, the Previous Update Status field will display the appropriate error message. Please go to step 7 and attempt the update process again. If the same error occurs, please contact ADTRAN Technical Support.

19.If the update of the module was successful, the module will either restart immediately and resume operation or restart at the specified time and day of the week, depending on your selection.

20.To update additional modules, go to Step 6 and select the appropriate slot.

8-6 ATLAS 800PLUS User Manual 61200226L1-1