Adjusting the LCD Monitor

 

 

 

 

 

 

 

Auto Phase

 

 

 

 

 

 

 

 

 

 

 

A confirmation box is displayed. The default selection

 

 

 

 

 

 

 

is [Yes]. Press

to adjust the phase automatically. If

 

 

 

 

 

 

 

you want to cancel, select [No] and press .

 

 

 

 

 

 

 

To save the adjusted value, select [Phase] or [Clock],

 

 

 

 

 

 

 

then press .

 

 

 

 

 

 

 

(Auto Configuration)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Configuration automatically adjusts image posi-

 

 

 

Auto Config

 

 

 

 

Yes

 

No

 

tion, clock, and phase.

 

 

 

 

 

 

 

 

A confirmation box is displayed. The default selection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is [Yes]. Press

to execute the menu. If you want to

 

 

 

 

 

 

 

cancel, select [No] and press .

 

 

 

 

 

(Miscellaneous)

To save the adjusted value, select [Brightness], then press .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select the item by pressing

or

, then press .

 

 

 

Miscellaneous

 

E

 

 

 

Init NVRam

 

 

 

 

 

 

Init NVRam

 

 

 

 

 

 

 

 

 

OSD Timeout

 

All values of the OSD menu are set to default.

 

 

 

 

OSD Position

 

A confirmation box is displayed. The default selection

 

 

 

 

 

 

 

 

is [Yes]. Press

to execute the menu. (If you want to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cancel, select [No] and press

.) This setting is acti-

 

 

 

 

 

 

 

vated by turning off the power to the LCD Monitor and

 

 

 

 

 

 

 

then turning the power back on again.

 

 

 

 

 

 

 

 

OSD Timeout

 

 

 

 

 

 

 

 

 

 

 

OSD Timeout is used to set the OSD idle time-out. If

 

 

 

 

 

 

 

no active action, key press or automatic configuration

 

 

 

 

 

 

 

occurs for the defined period, the OSD menu is closed.

 

 

 

 

 

 

 

There are four OSD time-out values available.

 

 

 

 

 

 

 

Select the item by pressing

or

, then press .

 

 

 

 

 

 

 

OSD Position

 

 

 

 

 

 

 

 

 

 

 

The sub-menu is displayed.

 

 

 

 

 

 

 

 

 

 

Select the item by pressing

or

, then press .

 

 

 

 

 

 

 

The sub-menu is displayed.

 

 

 

 

 

 

 

 

 

 

Adjust the OSD Position by pressing

or

, then press

 

 

 

 

 

 

 

. (To cancel, press and then turn off the power to

 

 

 

 

 

 

 

the LCD Monitor. When the power is turned on again,

 

 

 

(Information)

the operation will be canceled.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This menu is used to display information about the sys-

 

 

 

Information

 

 

 

 

Version:

 

 

tem. The OSD window is displayed. If

is pressed,

 

 

 

V-Freq-:

 

 

the information window is closed and the main menu is

 

 

 

H-Freq-:

 

 

displayed.

 

 

 

 

 

 

 

PixelCLk:

 

 

 

 

 

 

 

 

 

 

Width:

 

 

 

 

 

 

 

 

 

 

Height:

 

 

 

 

 

 

 

3Press

16The OSD main menu disappears.

Page 16
Image 16
Panasonic CF-VDL02BM Auto Phase, Auto Configuration, Miscellaneous, Init NVRam, OSD Timeout, OSD Position, Information