Touchscreen
CAUTION
The touchscreen function can not be used when using the full screen in [Command Prompt].
When the operation of panning is performed, the touchscreen function will not work properly.
If a change is made to the screen resolution, or the cursor can not be pointed correctly with the finger or stylus, be sure to perform calibration.
| Handling the Touchscreen |
| Do not place any object on the surface or press down forcefully with |
| jects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens). |
| Do not apply pressure within 5 mm of the perimeter of the display panel. The cursor may |
| |
E | move to the edge of the display. |
| Do not operate the computer when such things as dust are on the screen, or allow contact |
| with substances that could dirty the touchscreen, such as oil. The cursor may not work |
| |
| properly in such cases. |
| When the touchscreen becomes dirty: |
| Use a dry soft cloth such as a gauze to clean the dirty areas. |
| Do not use benzene, thinner, or disinfectant- type alcohol. |
|
|
10
