Panasonic CF-VDL02BM specifications Make necessary changes Select OK, Windows XP

Touchscreen

2Make necessary changes

3Select [OK]

NOTE

Adjustments can be made when double-click operations are assumed by the com- puter although single-click operations are intended, by clicking [Windows] from the display shown in the previous page and decreasing the value for [Time] in [Double Click Settings].

Immediately run [Calibrate] when the number of Calibration Points is changed.

It is also possible to change the double click speed for [Tap and Buttons]*1.

It is important to note that when the double click speed for [Mouse] is changed, the double click time for [Windows] is also changed.

	*1	Windows XP	: in [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
E
		Windows 2000	: in [Start] - [Settings] - [Control Panel] - [Mouse].

<Only for CF-M34 series models other than the CF-M34C******>

You can use the touchscreen without changing the settings when the LCD Monitor is connected to Serial Port B. To connect to Serial Port A, select [Hardware] and set [Settings For] to [Device 2] and [Com port] to [COM1].

<Only for the models with the Display Rotation Tool>

Rotate the display to landscape mode (0 degrees) before performing the calibration.

12