Table of Contents
2Please Read First
3Table of Contents
3Outlaw Audio Enhanced Cube Subwoofer
3Unpacking
3Before You Begin
4Subwoofers, Bass and Overall System Performance
5
5 Setup Guide
5 Connecting to Your System
5Connecting to a System with a Subwoofer Preamp Output
6Connecting to a System without a Subwoofer Preamp Output, but with Standard Left/Right Preamp Outputs
7Connecting to a System with no Preamp Outputs
8Subwoofer Placement
8Notes On Subwoofer Placement
8Setting the
8Phase Switch
8Variable Crossover
8Volume Level
9The Scattered Subwoofer System (Two
9What’s Needed to Connect Two Subwoofers?
9Placement and Level Control
9Care and Maintenance
9 Cleaning
9When You Are Away
9Troubleshooting
9Troubleshooting Guide
10Outlaw Service Information
10The Outlaw Audio
10
11Outlaw Audio Limited Warranty
The contents of this manual are Copyright © 2009 by Outlaw Audio, LLC, and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Specifications are those in effect at the time of printing. Outlaw Audio reserves the right to change specifications or designs at any time without notice or obligation to modify existing units.
Owner’s Manual
Outlaw Audio Enhanced Cube Subwoofer
Outlaw Audio
Enhanced Cube Subwoofer
Congratulations on the purchase of an Outlaw Audio
The
Among the
■■A long throw 10” driver for deep bass extension
■■Oversized spider for increased linearity at high excursion
■■A powerful 1,000 watt RMS (2000 watts dynamic) amplifier for precision driver control
■■Signal Sense for automatic turn on/off (can be defeated)
■■
■■Stereo line level and speaker level inputs
■■LFE input
Unpacking
The carton and packing materials used in shipping your new subwoofer were specially designed to cushion it from the shocks and vibrations of shipping. We strongly suggest that you save the carton and packing materials to use if you move, or if the unit ever needs to be shipped back to us for any reason.
To minimize the size of the carton in storage, you may wish to flatten it by carefully opening the top and bottom flaps and folding the carton flat. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.
Before You Begin
Before proceeding with the integration of the
■■Do not plug the power cord into the
■■Always refer to the instructions that came with the receiver or processor for specific procedures, warnings and options.
■■Make sure to insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.
■■Do not bundle the subwoofer cable or speaker wire with the power cord. This may adversely affect the sound quality and introduce unwanted hum into your system.
3