OWI SELF-AMPLIFIED (SINGLE INPUT/ SOURCE) SPEAKER MODULE

AMPIC5 OR AMPIC6

Description:

Having many of the recent most popular installer features, the AMPIC 5/6 power module is made to expressly fit onto the OWI Model IC5 or IC6 coaxial speaker providing a high fidelity module providing up to 25 watts of Class AB power right at the speaker. By being within inches of the speaker, the amplifier enjoys maximum damping control of the speaker since the speaker sees optimum low source impedance for maximum high fidelity reproduction. By being a dedicated amplifier to this speaker, it is tailored to match the speaker for optimum response.

Lower Noise Feature, Differential input

The power module has critical features making it a fast and easy install in the field. To reject noise, it has a fully differential amplifier at its input. Also it provides the same kind of noise suppression a transformer does with excellent common mode noise rejection.

Single ended sources (unbalanced) such as CD, DVD

Where the source is single ended such as CD player, plus goes to plus and the shield goes to the minus input. If any noise is observed, place a jumper between minus and ground.

Minimum additional space

The amplifier is molded to fit exactly around the speaker magnet allowing the smallest possible size. It adds barely an eighth of an inch more depth for those tight installations. For convenience the connectors located under the PCB are docking and simply unplug allowing convenient wire attachment.

To further enhance it’s ease of installation, each power module has both a second connector for downstream amplifiers and individual volume controls at each amplifier. If no controls are wished at the speaker, simply turn it fully clockwise for maximum gain and set levels at the control electronics.

Wiring to down stream power modules using the provided output connector

Wire Plus to Plus, Minus to Minus, but only connect one end of the shield at the second amplifier module. This will optimize system noise. For third amplifiers etc. follow the same rule; connect all three wires at the farthest module and don’t connect the shield at the second connector

Wiring the speakers. - The amplifier is capable of delivering power into either 4 or 8 ohms.

1 speaker – direct

2 speakers – Parallel - Since the speaker is 8 ohms, two in parallel work well

4 Speakers – Use series parallel- Wire speaker pairs in series then take the pairs and place them in parallel. This will provide approximately 6.5 watts per speaker or a maximum of 25 watts. Actually the output power is influenced by the length the wire is run, and wire gauge.

Power source

Power is provided by a 12 volts AC source. There is no polarity on the power input. Use a minimum of 16-gauge wire. If the installer is stuck with only DC, it will work too. Either AC or DC power source will work up to 14 volts. The Power Module AMPIC 5/6 comes with a 12-volt AC power supply optimized for this amplifier.

Wire gauge

For music applications, where one amplifier is powering one more speaker, use a minimum of 16-gauge wire. For Monday night football bar installations, make the wire gauge as large as possible between speakers.

Low level audio wire runs

Low-level audio needs only 22 gauge twisted pair with shield. Beldon 9451 or equivalent is a popular choice. Being differential, the low level input can be as long as 3500 feet without concern. If the source is unbalanced, a balancing preamplifier is recommended for longer runs over 200 ft.

Page 5 of 16

Filename:AMPIC5_6 MANUAL

 

07/18/08

Page 4 Page 6
Page 5
Image 5
OWI AMP-IC6, AMP-IC5 Description, Lower Noise Feature, Differential input, Single ended sources unbalanced such as CD, DVD
Page 4 Page 6

AMP-IC6, AMP-IC5 specifications

The OWI AMP-IC6 and AMP-IC5 are advanced amplifier platforms designed to deliver exceptional audio performance and versatility for a range of applications. These amplifiers are particularly popular in home audio systems, professional environments, and educational settings due to their robust features and cutting-edge technologies.

The AMP-IC6 is a high-efficiency Class D amplifier, known for its powerful output and compact design. With a power rating of up to 60 watts per channel, it provides ample power to drive both passive and active speakers, making it suitable for various audio setups. One of the standout features of the AMP-IC6 is its ability to operate at high efficiency, resulting in less heat generation compared to traditional amplifiers. This ensures longer operational life and reduced energy consumption, which is increasingly important in today’s eco-conscious environment.

In contrast, the AMP-IC5 offers a slightly lower power output, typically around 50 watts per channel, but shares many of the same technological advancements as the AMP-IC6. Both models employ advanced signal processing technology, enabling superior sound quality with low distortion and excellent dynamic range. This translates to clearer vocals, richer bass, and overall enhanced audio fidelity, appealing to audiophiles and casual listeners alike.

Both amplifiers feature multiple input options, including RCA and balanced inputs, catering to various source devices. They are equipped with adjustable gain controls, allowing users to fine-tune their audio experience. Additionally, these amplifiers incorporate thermal overload protection and short-circuit protection, ensuring safe operation even under demanding conditions.

The compact and lightweight design of the OWI AMP-IC6 and AMP-IC5 amplifiers makes them easy to integrate into any audio system or space, without compromising on performance. Their versatility enables use in diverse settings, from classrooms and conference rooms to home theaters and commercial audio installations.

In summary, the OWI AMP-IC6 and AMP-IC5 are powerhouse amplifiers that blend efficiency, power, and exceptional audio characteristics. Their robust feature set and modern technologies make them ideal choices for anyone seeking reliable and high-quality audio solutions. Whether enhancing a home sound system or providing audio support in a professional environment, these amplifiers deliver performance and versatility that meet the demands of today’s audio consumers.
Top Page Image Contents