Minimum/Maximum Temperatures

The highest temperature and humidity values since the last reset can be displayed by pressing the Min/Max button on the right side of the Mold Alert.

The lowest temperature and humidity levels since the last reset, can be displayed by pressing the Min/Max button a second time.

The current values can be shown again by pressing the Min/Max button a third time.

The reset key is located above the Min/Max button on the right side of the unit and is used to reset Min/Max values when they are displayed.

If humidity levels are high

To lower humidity, you can open windows or put a fan in the area to better ventilate it, which may prevent mold growth.

If there is moisture or a water leak, mold growth may have occurred. This mold can cause health problems and the sooner you detect it, the more likely you are to be able to control it.

If you suspect that you have a mold problem, and the remedies outlined in this manual prove to be insufficient, please contact a mold control professional.

If humidity levels are low enough

The area in which you have placed the unit is safe from mold growth, however the Mold Alert thermo-hygrometer is a useful product to have in any home due to its accurate measurements of temperature, dew point, and humidity.

maintenance

Do not expose the Mold Alert to extreme temperatures, vibration, or shock.

Clean the unit with a soft damp cloth. Do not use solvents or scouring agents.

Replace batteries if the unit stops working.

Page 5
Image 5
P3 International P0270 operation manual Maintenance, Minimum/Maximum Temperatures, If humidity levels are high