36 |
Cleaning lightweight flexible rugs
Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) and will prevent rug from clinging to cleaner. Contin- ue to lift up nozzle so that when you have reached the edge, it is com- pletely off the rug. Move cleaner back to start again, lower nozzle, and use only forward strokes.
37 |
Edge cleaning
Edge cleaning is provided on both sides of nozzle to remove dirt in car- pet near baseboards and furniture. Guide either side of nozzle parallel to edge of carpet or furniture.
38 |
Stair cleaning
A stair cleaning handle has been designed for ease in using your cleaner on stairs. With handle in operating position, place fingers under edge of stair cleaning handle and guide cleaner with other hand on upper handle.
As an alternative, you may use the hose and furniture nozzle for stair cleaning, cleaning from bottom to top.
When using cleaning tools, the agitator will continue to rotate.
CAUTION: To avoid personal injury or unnecessary wear to car- pet, and to prevent the cleaner from falling, use extra care if cleaner is placed on stairs.
Cleaning tools
39
Tool set includes a hose, wand, crevice tool, furniture nozzle and dusting brush.
40 |
D |
Attach hose to cleaner
Turn cleaner off before attaching or removing hose.
With cleaner handle in upright posi- tion, open hose door and insert hose connector until locked in posi- tion. Suction will automatically be diverted to the hose when cleaner is turned on.
To remove hose, press latch (D) on hose connector and pull up.
Note: Hose must be removed from hose door when cleaning carpet and rugs to insure proper clean- ing performance.
CAUTION: Agitator continues to rotate while cleaner handle is in upright position. Avoid tipping cleaner or setting it on furniture, fringed area rugs or carpeted stairs.
8
