Pacific Digital Upright Vacuum Cleaner warranty Lubrication, Service, If you have a problem

If you have a problem

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below.

Problem: Cleaner won’t run

Possible cause

Possible solution

•Not firmly plugged in

•Plug unit in firmly

•No voltage in wall plug

•Check fuse or breaker

•Blown fuse/tripped breaker

•Replace fuse/reset breaker

Problem: Cleaner won’t pick up

Possible cause

Possible solution

•Broken or worn belt

•Replace belt

•Brush roll brushes worn

•Replace brush roll

•Filter bag full

•Change filter bag

•Incorrect carpet height setting

•Move nozzle control to type of carpet being cleaned

Problem: Cleaning tools won’t pick up

Possible cause

Possible solution

•Hose clogged

•Remove hose and tools; remove obstruction

•Hose connector inserted incorrectly

•Re-insert hose connector properly

Problem: Cleaner hard to push

Possible cause

Possible solution

•Incorrect carpet height setting

•Move nozzle control knob to a higher setting

Lubrication

The motor is equipped with bearings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubricant to motor bearings.

The agitator is equipped with two ball bearings that should be lubricated peri- odically by a Pacific Floor Service Center.

Service

To obtain approved service and genuine parts, locate the nearest Pacific Floor Warranty Service Dealer by checking the Yellow Pages under “Vacuum Clean- ers - Household”.

If further assistance is needed, con- tact Pacific Floor, 2259 Sheridan, Muskegon, Michigan 49442

Phone: (800) 968-1332

www.nextwaveofclean.com

Always identify your cleaner by the complete model number when request- ing information or ordering parts. (The model number appears on the bottom of the cleaner.)

Servicing of double- insulated appliances

This vacuum cleaner is double insulat- ed. In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulat- ed appliance, nor should a means for grounding be added. Servicing a dou- ble-insulated appliance requires extreme care and knowledge of the sys- tem, and should be done only by quali- fied service personnel. Replacement parts must be identical to those parts being replaced. A double-insulated appliance is marked with the words “DOUBLE-INSULATION” or “DOUBLE-

INSULATED”.

The symbol may also be marked on the appliance.

12