Packard Bell 300 manual Removing the Bottom Cover, Removing the rubber stoppers

3

Removing the Bottom Cover

1.Remove three rubber stoppers (you do not need to remove the stopper located on the FM module cover.)

Fig. 1 Removing the rubber stoppers.

2.Remove the FM Module cover. It has been clicked into place, so you can easily push it out using a flat blade screwdriver.)

Note Optionally, remove the FM module clicked into the slot.

3. Remove the four screws.

Fig. 2 Screw in FM module compartment. 4. Remove the bottom cover.

Packard Bell Vibe 300 Disassembly Manual