13

3.Gently lift out the LCD panel.

4.Remove the remaining 2 screws on each side of the LCD panel to remove the brackets.

Wireless Antenna

To remove the wireless antenna, perform the following steps:

1.After removing the LCD panel, remove the tape holding the antenna.

2.Remove the screw (see Picture 18).

Picture 18. Wireless Antenna Screw

LCD Lid Hook

To remove the LCD lid hook, perform the following steps:

1. After removing the LCD panel, you can take out the hook.

Page 14
Image 14
Packard Bell B3 manual Wireless Antenna, LCD Lid Hook