Note: Use extra care when unlocking or locking the CPU because the screw driver might cause damage on CPU’s edge each time when unlocking or locking the CPU.
Removing the Top Cover
To remove the Top Cover , first remove the battery (see Removing the Battery), remove the HDD (see Removing the Hard Disk Drive), remove the optical disk drive (see Removing the Optical Disk Drive), remove the keyboard (see Removing the Keyboard) and remove the LCD module (see Removing the LCD Module) then perform the following steps:
1. Remove all screws on the bottom of the base unit as shown in Fig. 22
Fig. 22 Bottom cover screws
M2.5x9 silver
Packard Bell EasyNote C3 Disassembly Manual | 15 |
