Fig. 12 Removing Heat plate from base unit
Note: When assembling the heat plate, make sure that these three hocks on the heat plate are properly inserted into the openings located on the top cover.
Removing the Memory Module
To remove the memory module, first remove the Keyboard cover (see Removing the keyboard cover), remove the keyboard (see Removing the keyboard), remove heat plate (see Removing heat plate) then perform the following steps:
1. Unclip memory module as shown in Fig. 13
Fig. 13 Removing the memory module
2. Remove the Memory Module from its slot and put it aside.
Removing the Wireless Module
To remove the Wireless Module, first remove the keyboard cover (see Removing the keyboard cover), remove the keyboard (see Removing the keyboard), remove the heat plate (see
Packard Bell EasyNote T5 Disassembly Manual | Page 10 |