Palsonic 3499G owner manual Auto Search, Manual Search

1.Press MENU button four times to display Program menu.

Tuning in 2. Press CH+/- button to select item.

3.Press VOL+/- button to confirm or adjust the selected item.

Auto Search

Enter the Program menu and select Auto item.

Press VOL+ or VOL- button and the TV set starts Auto Channel Preset. All Active channels will be preset and stored into the memory automatically. After presetting, the TV will stop at the last channel program. During the

process of Auto channel preset, pressing the MENU or CH+/- button will stop the process.

1

HELP

1

3

			Note:
3		2	Before you start Auto Search, we strongly recommend you to
			set a proper Sound System according to your local area.
			Please refer to the steps of Sound System setting on page 16.
				Manual Search
			Use manual search function if desired channels cannot be
			preset or if you would like to preset channels to specific
			position numbers one by one.
			Please Select a channel number with
			digital buttons or CH+/- buttons. You
			can also enter program menu, select
			Display item and adjust with VOL+/-
			button manually to select the desired
			channel number (from 0~254)
			In Program menu, please select Manual
					item and start
	2		manual search with VOL+/- buttons. Pressing VOL+, the set
			searches towards higher frequency; Pressing VOL-, the set
			searches towards lower frequency. The search stops when a
	2		program is found and the is program will be stored in the
			specified position number
	3		You can use Band selection to quicken search process if you
			know which band your desired program is located in. The band
			switches among VHF-L, VHF-Hand UHF.
			Repeat the above steps if you want to store another program in
			other position number.

14