Palsonic 5159G OPERATION , To preset channels (SEARCH)

OPERATION

Tuning in (continued)

Use the SEARCH function if desired channels can not be preset with the ASM or if you would like

to preset channels to specific position numbers one by one.

It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP

functions.

If ASM can not preset the desired channels, or you want to preset the desired channels one by one with

the preferred channel numbers, please make use of SEARCH.

Enter into PRESET menu, press the POS+/- button to

select and highlight POS. Press the VOL+/- button to

select a desired position number (from 0-255).

Note: you can also press 0-9 button to select a one-digit

position number.

Press --/--- button and number buttons to select a two-

digit or three-digit position number.

Press the POS+/- button to select SEARCH. Press the

VOL+ button to search channels from current channel

to higher channel. Press the VOL- button to search

channels from current channel to lower channel. When

a channel is located, the searching stops, this channel is

then memorized with the preset position number.

Note: you can also make use of BAND selection to quicken the

searching process in your desired band. Press the POS+/- button to

select BAND, pressing the VOL+/- button moves the band to the next

one in the sequence below.

V-L V-H UHF

PRESET 4

SKIP ON

BAND V-L

FINE

AFT OFF

ASM

S-RCV OFF

POS

3. When you want to store another channel at another position, repeat steps 1 & 2 above.

Note: After SEARCH, to exit the PRESET menu, press the RECALL button, or press PRESET

button or MENU button repeatedly until OSD disappears.

To preset channels (SEARCH)

PRESET 20

SKIP OFF

BAND V-H

FINE

AFT OFF

ASM

S-RCV OFF

POS

PRESET 4

SKIP ON

BAND V-L

FINE

AFT OFF

ASM

S-RCV OFF

POS

2.