CONNECTING OTHER EQUIPMENT
External Equipment ConnectionsThis set is incorporated with Audio & Video input and output terminals which allow direct connection
to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and
recording the programs. Refer to the owner’s manual of the equipment to be connected as well.
The figure below shows how to connect the TV set to the video equipment.
Or you could use another group of AV IN terminals on the front cabinet as follows.
Note: As regards the AV input terminals, connect either the front or rear terminals but not both.
Press the "AV/TV" button on the remote controller to select AV mode, "AV" and corresponding
colour system will be displayed on the screen. The picture displayed on the screen is the program
played back by the video equipment.
The figure below shows how to connect the TV set to the VCR
Press AV/TV button on the remote control unit to set the TV receiver to TV mode, and choose the
desired channel. At this time, the program recorded is the one displayed on the screen. ( The
VIDEO/AUDIO output terminals only output TV signals.)
Note: the following mis-operation should be avoided during recording.
* Press STANDBY button or set to AV mode.
* Change the current channel accidentally
Video playbackRecording TV program19