If there is no input signal, then a blueback appears. After 15 minutes, the set auto goes to STANDBY.
Turning off
1 Press the Power Switch on the TV set if you want to cut off the power completely.
2 If you want to turn off the TV set temporarily, press the button on the remote controller.
10
Notes:
!
If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2.
2 In STANDBY mode, press the button on the remote controller and the TV set is turned on.
3 In STANDBY mode, you can also press the AV/TV button on the set to turn on.
Press the Power Switch on the TV set.
1
Turning on
