Palsonic TFTV-430 Functional Button Instruction, Exchange Channel, Display Status, Aspect

Functional Button Instruction

Exchange Channel

CH-LIST	You can also exchange two channels as follows.
	Press the "CH-LIST" button ,the channel list will be displayed on the screen.
	Channel list
	0 CCTV5	5 CV
	1 CCTV1	6 CCT
	2 CCTV2	7 CC	Current channel
	3 CCTV3	8 CTV2
	4 CCTV4	9 CC3

Use the direction buttons to choose specific channel.

Press left button and the following window will be displayed on the screen.

Exchange

7 1

OK Cancel

After inputting the channel number with the numerical buttons. Select "OK", press "ENTER" button to confirm and quit. Select "Cancel", press "ENTER" button to cancel and quit.

For example:

Input 10, select "OK" then press "ENTER" button to confirm. The channel 7 will be exchanged with channel 10.

Display Status

DISPLAY

Aspect

ASPECT

In TV mode, press the "DISPLAY" button, the screen will display the current channel number/ channel name/skip channel status/current time.

Press the "DISPLAY" button again, it will display the TV display mode/audio mode. Press the-DISPLAY" button three times to exit the display status.

In PC mode, press the "DISPLAY" button, the screen will display resolution and frequency information.

If it is not in the above two modes, the screen will display the status of the current viewing source when you press "DISPLAY" button.

Press "ASPECT" button, the following window will be displayed on the screen.

Aspect	Full Screen
		Press direction buttons to select your favourite mode.
		There are five options: Full Screen/Normal/Wide/Cinema/Sub title.

Note: In PC and YPbPr mode, only "Full Screen/Normal" items are available.

-30-