Basic Operations
POWER |
|
| CH |
VOL | VOL |
- | + |
CH
MENUEXIT
C.SYS ZOOM CLK SLP
AUTO.ADJ P.M DSP
1 2 3
4 5 6
7 8 9
0
Turning on
1 Connect the power correctly, then the red indicator lights up and the unit is in STANDBY mode.
2 Press the POWER (
) button on the remote control or on the unit to turn on the TV set. The indicator will turn to yellow.
Turning off
1 With the power on, press the POWER (
) button to turn off the TV and the TV is in STANDBY mode, the indicator will turn to red.
2 If you want to turn off the power completely, unplug the power cord from the wall outlet.
Note: Do not switch the on/off state of the unit quickly. The interval of the turning on and turning off should be more than 5 seconds.
Selecting input signal
1 Press the SOURCE button on the unit or 
button on the remote control. The screen displays the menu as shown on the right.
2 Press CH
to highlight your desired input signal source. Press VOL+/- or wait for about 4 seconds and the desired signal source will be selected.
Note: All buttons shown in the manual are located on the remote control unless otherwise indicated.
15
