I n i t i a l
INSTALLATION
Place your video
horizontally on a flat, steady base so that air can circulate around it for ventilation away from humidity and heat, magnetic fields, such as those from loudspeakers etc ,and with no heavy objects placed on top
Connecting up the video recorder
AC 204 V 50 Hz
The buttons to use are marked on the following pages.
Unplug the aerial cable from your TV and plug it into the ANT" .IN" socket of the video.
Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV.
Plug a RCA cable into the "RCA" socket of the video and the AV socket on the TV if available.
This connection will provide best picture and sound quality. Ask your dealer for an appropriate cable if you do not have one. Without a RCA cable, you need to follow the steps described under "If you are not using a RCA cable" (right page and page 17).
Make sure the rating of the household mains supply matches the rating shown on the back of the video.
Now plug in the mains lead. The display of the video should now light.
Fitting the remote control's batteries
1.5 V (AAA)
Fit the batteries as shown by the pictures in the bay.
Protect your environment by returning used batteries to your dealer. Since batteries contain toxic substances they require special disposal methods.
Make sure the batteries are always of the same type and age, and remove them from the remote control if you are not using it for a long period.
4
