Panamax MAX 5510 owner manual Feature Overview

FEATURE OVERVIEW

Switched	Lamp	Lamp and Meter	LED Indicators:
Outlets	Receptacle:	Dimmer:	Status indicator lights
Pushbutton:	For the 5W-halogen	Controls brightness	for Switched Outlets,
1 of 2 Triggers that	Convenience Lamp.	of the Ammeter,	DC Voltage Triggers,
can activate a turn-	Use to illuminate	Voltmeter	and Unsafe Voltage
on or shutdown	working area &	backlighting and
sequence for the	other components.	Convenience Lamp.
Isolated and High-
Current outlets.

AC Regeneration

Control and LED

Indicators:

Select either Isolated or Balanced power for your digital source components.

Ammeter:

Backlit analog meter measures current draw for connected equipment up to 15 Amps.

Voltmeter:

Backlit analog meter measures incoming voltage source from 0-150 VAC.

Convenience Outlet: Provides a quick convenient way to plug in components such as camcorders and video game systems.

15A Circuit Breaker: Opens in the event that equipment plugged into the MAX® 5510 draws too much current. When white is visible, the breaker has opened. Reduce the load and push to reset.

Filtered Outlet Bank 1: Two Always-On, Balanced, Double L filtered outlets for Low-Current analog components such

as pre-amplifiers, receivers, VCRs and tape decks.

Isolation Transformer Outlets:

Four outlets provide either Isolated or Balanced power for digital source components such as DVD or CD players. Use the front panel AC Regeneration pushbutton to select the desired power mode.

High-Current Outlet Bank: Two delayed outlets designed for High-Current components such as amplifiers and powered subwoofers.

The current available to connected equipment is not limited by the noise filtration components.

AV RCA Jacks: Four pair of RCA style connectors. Circuits are optimized for audio and video signal line protection.

Rear Panel

Convenience Lamp

Receptacle:

Satellite Coax Jacks: Two pair of gold plated F-Connectors optimized for Satellite TV signal line protection.

Cable TV Coax Jacks: Gold plated F-Connectors optimized for Cable TV or non-amplified Rooftop Antenna signal line protection.

IEC Main Power	Ground Lug:	Filtered Outlet Bank 2:	Isolation Transformer	Voltage Sense Trigger Inputs:
Receptacle:	Provides a	Two Always-On, Balanced	Circuit Breaker:	3.5 mm Mono Mini-Plug jacks. Connect to a remote
Power cord connects	common	Double L filtered outlets	Opens in the event that	trigger device that provides 12VDC to trigger a startup
to this receptacle.	grounding point	for Low-Current analog	equipment connected	/ shutdown sequence. This is the second trigger that
	for equipment	components such	to the Isolated Outlets	will activate the MAX ® 5510 turn-on or shutdown
	with separate	as pre-amplifiers,	exceeds 4 amps current	sequence. (See switched outlets pushbutton on front
	ground leads	receivers, VCR’s	draw. When white is	panel).
		and tape decks.	visible, the breaker has
			opened. Reduce the
			load and push to reset.	Isolation Transformer Outlets Turn-Off Switch:
				3-position slide switch. Allows adjustment of the
				Turn-Off delay for the 4 Isolation Transformer Outlets.
				Choose between “Always-On”, 10 and 30 seconds.

High-Current Outlets	Telephone Jacks:
Turn-On Switch:	In/Out connections
3-position slide switch.	for telephone line or
Allows adjustment of the	pay-per-view line
Turn-On delay for the 2	protection.
High-Current Outlets.
Choose between 0, 10
and 30 seconds.

4 1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com