Panasonic 4318 manual Type number, Technical data

	Type number
4318	Combination heat detector

The zone line is connected to the base 2324 (A+ & B-)

Ext. LED is connected to the base 2324 (A+ & L).

A

B

In the detector:

AContact for base 2324

BContact for base 2324

/ EBL500		Mark		Mark
EBL128 lineinput	-	B-	Zone line	B-
EBL512/ Zone	+	A+ A+		A+ A+
		B- L	Ext. LED	B- L	End-of-line
		+			device
C.i.e.

See also "Engineering Instructions for detectors Type 435x".

The detector is plugged in a base 2324. End-of-line device depending on the zone line input.

		Technical data
Voltage (V DC)
rated	24
allowed	10-30
normal	24
Current consumption at nom. volt.	Depending on the type of base it is plugged into. For more details see
(mA)	the Product Leaflet respectively, e.g. MEW00008 (Base 2324).
quiescent (detector only)	0.015
active (detector only)	min. 3
Ambient temperature (°C)
operating	-10 to +50
storage	-25 to +70
Application temperature class A1 (°C)
typical / max.	+25 /			+50
Ambient humidity (% RH)	max. 95, non condensing
Ingress Protection rating (estimated)	IP51
Alarm temp. (T=°C; deltaT=°C/168s)	59; 18			(T=static response temp. Class A1 Tmin.=54; Tmax.=65.)
Size ∅ x h (mm)	102 x 39
Weight (g)	54
Construction / Colour	Modified polycarbonate / Grey (N8, Muncell colour code)
Approvals			07 EC Certificate no. 0845-CPD-232.1566; EN54-5, class A1R.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet	Date of issue	Revision / Date of revision
MEW00852	2007-01-11	3 / 2008-09-18