Panasonic 44-Series manual Assigning PSD Numbers to One-Touch or Soft Keys, For example

			2. Setting Up Your Phone
For example:
		Corresponds to
One-touch or soft	personal speed dial bin . . .
key . . .	10 PSD systems		40 PSD systems*
#1	90 or 900		900, 910, 920, and 930
#2	91 or 901		901, 911, 921, and 931
#3	92 or 902		902, 912, 922, and 932
etc.
*A maximum of ten PSD numbers can be assigned to the one-touch keys on a
small-display or non-display phone.

Note: The PSD bin for each one-touch or soft key appears on the display when the phone is in Personal Speed Dial mode. On large-display phones, either 5 or 10 bins are displayed at a time, depending on how your extension is programmed. You can display the next group of bins by pressing the “NEXT” key, or the previous group by pressing the “PREV” key.

On small-display phones, two bins are displayed at a time. Press the “#” key to display the next two bins and the “*” key to display the previous two bins.

Assigning PSD Numbers to One-Touch or Soft Keys

1.Pick up the handset or press ON/OFF.

Note: On a large-display phone, you will need to be in Personal Speed Dial mode before you can assign PSD numbers. If you are not sure you are in this mode, press the MENU key to display the Main Menu, then press the key to the left of PERSONAL DIAL on the Main Menu.

2.Press PROG.

3.Press the desired one-touch or soft key (or press AUTO, then enter the desired PSD bin number). The PSD bin for that key appears on the display (e.g., “Enter PSD 901”). You may want to write down the bin number for the key - you will need this information to assign a name to the key.

4.Enter the phone number you want to be speed-dialed from that key (maximum length = 16 characters).

28 Issued April 2000 DBS-32-755