Word Clock
arrows are accelerated. The more you press or spin, the faster the delay setting will increment or decrement. Delay is not set until enter is pressed. The amount of delay available is dependent on the sampling frequency in use.
Sample Frequency | Maximum Amount of Delay Available (per input) |
|
|
32, 44.1, 48, 48.048 kHz | 30,000 µS |
|
|
88.2, 96, 96.096 kHz | 15,000 µS |
|
|
176.4, 192 kHz | 7,500 µS |
|
|
Input delay can be useful for time aligning input signals from differing sources. For example, digital wireless mics that have a processing delay in their outputs or recording a direct PA board feed as well as a live mic in the front of house space.
Word Clock
Stable word clock is fundamental to a high quality audio signal. The 744T uses a
The 744T can be used as a master word clock source or it can lock to external word clock during recording. The 744T disregards external clock, both AES and word clock, during playback.
Clock Master
When sending digital audio to several devices, one unit is designated as the word clock master and the others should be slaves. Generally, the device with the
The 744T can function as an A/D converter and can be used as the master word clock source. Slaved devices will derive their word clock timing from either their digital audio inputs, S/PDIF or AES/ EBU, or through their word clock input connection. As a word clock master the 744T generates word clock whether or not audio is sent.
Clock Slave
When using an external digital preamplifier connected to the 744T inputs, the recorder can derive its clock signal from the AES (S/PDIF) stream (it will slave to the external device), or the external device can be slaved from the 744T (if the external device has word clock input). If, for example, you are using a wireless receiver with a digital output, it may not have an external word clock input, and will be the word clock master.
If digital audio is connected to the 744T from more than one digital device, you must word clock the sources to the same clock, otherwise variations between the sources will render their signals unus- able.
If the 744T is slaved to external word clock, be certain that the source is stable. Loss of the word clock signal during recording can cause the 744T to revert back to its internally set sampling frequency.
If this occurs, the portion of the file recorded after the loss of word clock may not play back at the proper speed. For reliability, we recommend you set the 744T to the same sample frequency as the word clock source. Loss of the word clock signal in this case will most likely cause a glitch in the file, but the file will still be usable.
17