
744T User Guide and Technical Information
After recording is stopped, it can take several seconds for the 744T to finish “housekeeping” on CF. When preparing to remove the CF, always observe the amber activity LED for the CF medium. If it is lit, wait until it goes out before removing the CF. If the CF is removed while the LED is lit, at the very least the file will be corrupted and there is a possibility of FAT corruption as well.
Testing
CF cards varied widely in their write/read throughput. Later generation “24x” and greater CF cards can reliably read and write
Not all CF medium can sustain write speeds for reliable 192 kHz recording. Use the speed test utility to make certain that installed medium can support the selected number of tracks at 192 kHz.
Drive Repair
The same drive repair utilities are available for the CF as the internal hard drive.
Qualified CF Cards
Several CF mediums have been tested and “approved” for use in the
File Naming / Numbering
Files generated by the 744T are named using a syntax made up of four parts: scene number, take number, mono track designator (if mono file is selected), and extension.
scene | take | mono | extension |
| |||
number | number | file |
|
|
| designator |
|
Scene Numbers
Scene numbers are
34
firmware v. 1.04 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.