Input-to-Track Routing

any combination of

the four inputs can

be routed to any of the four tracks

Regardless of which tracks are assigned for recording, monophonic file numbering always starts with 1, i.e., if only track D is selected for recording in a monophonic .WAV file, the resulting filename will have a _1 suffix, not _4. Polyphonic files will play back the recorded track starting from track A, i.e., if a poly file is recorded on tracks B and D, playback will occur on tracks A and B.

Use the Input:Routing selection in the menu to enter input select mode. Alternatively, press the

input key to cycle through the six preset input routing combinations.

The last selection in the list is CustomRoute. Press the EDIT soft key to enter custom routing mode. Custom routing allows any input to be assigned to any record track. When assigning customer rout- ing, active input and track combination are displayed in white text. The four inputs are shown on the left; the four record tracks are shown on the right.

To assign custom input routing:

1.Press the input key until InputRouting is displayed in the LCD display.

arrow indicates highlighted input is assigned to highlighted track

select to exit menu and apply selected routing

selet to move up

and down menu

select to remove input assignment

2.Press the EDIT soft button () and scroll to the appropriate input screen.

3.Using either the Multi-Function Controller or the up and down arrows, navigate to desired input-to- track combinations.

4.When a chosen pairing is highlighted press either the ASSIGN soft key or the Multi-Function Controller to assign the combination. Assigned tracks are noted on the screen by the addition of an arrow pointing to the record track. The LED routing matrix will also show a flashing blue LED for the currently selected input-to-track combination.

5.Once a track is assigned move to the next input-to-track combination desired.

6.To remove an input-to-track combination assignment, navigate that combination and press the

UNASSIGN soft key.

7.Exit and complete the assignment by pressing the check mark soft key.

The input routing menu will always exit to the main screen whether entered from the input key or the menu selection.

19