One of the following can be used:

■Parallel interface requirement

■SCSI interface requirements

SCSI cable
15
SCSI-2 (FAST SCSI) compatible ( ☞P. 162)
Interface
ASPI manager ASPI Manager is required.
(Refer to the SCSI-2 board manual.)
Before You Start
System RequirementsPCInterface
To operate the KX-P8410 effectively, see the following.
CPU: More than Pentium or Pentium PRO
(133 MHz or faster CPU is recommended.)
Operating System: Windows3.1*1, Windows 95*2or Windows NT4.0*3
(Intel Only)
RAM: 16 MB or more (More than 32 MB is recommended.)
Free disk space: 100 MB or more
Virtual memory: 16 MB or more (More than 32 MB is recommended.) for
Windows 3.1 / 95
50 MB or more (More than 100 MB is recommended.) for
Windows NT 4.0
Display: Video card that can display more than 256 colors.
(A video card that can display more than 32,000 colors is
recommended.)
Drive: CD-ROM drive
*1MicrosoftWindowsoperating system Version 3.1 (hereafter Windows 3.1)
*2MicrosoftWindows95 operating system (hereafter Windows 95)
*3MicrosoftWindows NTWorkstation operating system, and Microsoft
Windows NTServer network operating system Version 4.0
(hereafter Windows NT 4.0)
SCSI-2 board ASPI Manager compatible SCSI-2 board
(Adaptec AHA-2940 is recommended.)
Based on the IEEE P1284-C standard
(An ECP compatible parallel port is recommended
for Windows 95. To turn on the ECP mode, use the
computer’s BIOS setup. Refer to the computer’s
manual for details.)