58
If you wish to adjust the density for each color independently,
perform the following, then go to step 5.
#Repeat instructions #through %of step 1 on page 54.
$Press the F button.
%Press the ENTER button.
&Press the F/Ibutton to darken/lighten the cyan color.
Pressing the F/Ibutton twice selects the next/previous level setting.
(For example:)
BIf you wish to make the density setting darker by 4 levels:
Press the Fbutton 8 times.
BIf you wish to make the density setting lighter by 2 levels:
Press the Ibutton 4 times.
'Press the ENTER button.
(Repeat instructions %through 'for each color
(MAGENTA, YELLOW, BLACK).
BTo skip a color, press the Fbutton.
BTo return to a previous color, press the Ibutton.
BBefore going to step 5, make sure the following is displayed.
Press the ENTER button to reprint the Color Calibration Page.
BThe line enclosure reflects the changes made to the settings.
BIf you are not satisfied with the current color density settings, repeat steps 4
and 5 above.
Notes:
B
The color density setting affects the average life of toner.
B
Save the Color Calibration Card for future calibrations.
Color Calibration
CYAN
Color Calibration
Calibration Test Print
CYAN
0* (-10 to 10)
Color Calibration
MAGENTA
4
B
5
Setup